Users Manual

Second Vehicle Security Operation: Press F button 4 times first then press
button to enter Second Vehicle Security Mode, Under this mode press button to
select CAR 2 operation ( icon and text will display) or CAR 1
operation and text will display.
Vehicle’s Status Check /Alarm Report: Press F button 1 times first then press and
hold buttons for 1 second until the beep confirms and then release the button.
The LCD remote will display the current status of the vehicle.(Include trigger
condition)
Voltage Check: Press F button 2 times first then press and hold buttons for 1
second until the beep confirms and then release the button. The LCD remote will
display the current voltage of the vehicle and text will display.
LCD Backlight: Press F button
3
times first then press and hold button for 1.0
seconds until the beep confirms and then release the button to enter LCD Backlight
time Mode, then keep press button to select LCD Backlight time
/ or .
Temperature Check: Press F button 4 times first then press and hold buttons for
1 second, until the beep confirms and then release the button. The LCD remote will
display the current Temperature of the vehicle and text will display.
Power Saver Mode: Press F button
2
times first then press buttons to enter Power
Saver Mode, Under this mode press button to enable power saver mode and
icon will display or disable power save mode and
icon will display While in Power Save Mode the LCD remote
will not look for any incoming signals from the main unit until a button is pressed.
EXIT: Wait 10 seconds, or press the other buttons to leave the setting except the F
button.
7
Click to buy NOW!
P
D
F
-
X
C
h
a
n
g
e
V
i
e
w
e
r
w
w
w
.
d
o
c
u
-
t
r
a
c
k
.
c
o
m
Click to buy NOW!
P
D
F
-
X
C
h
a
n
g
e
V
i
e
w
e
r
w
w
w
.
d
o
c
u
-
t
r
a
c
k
.
c
o
m