Installation Instructions

ManualsBrandsAdvanced Automotive Antennas ManualsElectronicsLTE module

The Advanced Communications Business Unit of Ficosa International develops telematic

systems with integrated antennas based on fractal technology. Telematic modules allow

internal and external communications within the vehicle integrating various

telecommunication technologies, such as mobile telephony, GNSS,.… in a single unit.

TCU H-D MY20

Telematics Control Unit

Advanced Automotive Antennas, SL.

Gran Via Carles III, 98. Planta 5

08028 Barcelona (Spain)

Description

Features

TCU MY20:

• GSM/WCDMA/ LTE data communication.

• Telephony integrated antennas.

• GNSS Internal antenna.

• Cost-effective and compact design.

• Automotive Qualified.

• FOTA

• Vehicle Status.

• Ride Data.

• UDS Data.

• UDS Diagnostics.

• Real Time Location.

• Analytics

• Stolen Vehicle Tracking (SVT)

Supported Services

Summary of content (11 pages)

PAGE 1
TCU H-D MY20 Telematics Control Unit Description The Advanced Communications Business Unit of Ficosa International develops telematic systems with integrated antennas based on fractal technology. Telematic modules allow internal and external communications within the vehicle integrating various telecommunication technologies, such as mobile telephony, GNSS,.… in a single unit. Supported Services © Ficosa International, S.A. All rights Reserved • • • • • • • • FOTA Vehicle Status. Ride Data. UDS Data.
PAGE 2
TCU H-D MY20 Telematics Control Unit Connections TCU connections TCU shall be connected to the vehicle using the connector detailed below which contains all the pinout that serves as an interface for power and communication purposes. TCU is designed to be powered through a electrical protection circuitry that provides a nominal voltage of 12.8V. This product is designed for building-in installation. © Ficosa International, S.A. All rights Reserved 61 km/h < 200 km/h Advanced Automotive Antennas, SL.
PAGE 3
TCU H-D MY20 Telematics Control Unit Mounting instructions TCU Fixation 1. Bracket and TCU shall be mounted as shown in figure 1. 2. As detailed in figure 2, pokayokes from TCU shall be matched with bracket holes in order to have screw holes aligned. 3. Screws (red in figure 3) shall be fastened to the TCU Cover applying a torque of 8090 in-lbs (9 – 10.2 Nm) This TCU fixation is done in-vehicle and once mounted the part will not be reachable. © Ficosa International, S.A. All rights Reserved Figure 2.
PAGE 6
TCU H-D MY20 Telematics Control Unit lFCC/ISED Regulatory Notices Modification Statement Advanced Automotive Antennas has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. Advanced Automotive Antennas n’approuve aucune modification apportée à l’appareil par l’utilisateur, quelle qu’en soit la nature.
PAGE 7
TCU H-D MY20 Telematics Control Unit lFCC/ISED Regulatory Notices FCC Class B Digital Device Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 8
TCU H-D MY20 Telematics Control Unit lFCC/ISED Regulatory Notices Trace Antenna Designs © Ficosa International, S.A. All rights Reserved Antennas This radio transmitter has been approved by FCC and ISED to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
PAGE 9
TCU H-D MY20 Telematics Control Unit lFCC/ISED Regulatory Notices © Ficosa International, S.A. All rights Reserved Additional Testing, Part 15 Subpart B disclaimer The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification.
PAGE 10
TCU H-D MY20 Telematics Control Unit Specifications Mechanical and Electrical specifications Dimensions 145 x 100 x 40 mm (excluding bracket) Operating Temp -20ºC to +85ºC Weight <300gr Casing Polybutylene terephthalate (PBT) Connectors GJM Pigtail 6P Power supply 12.8 VDC (Nominal) Current consumption 1A © Ficosa International, S.A.
PAGE 11