Installation Instructions

Advanced Automotive Antennas, SL.
Gran Via Carles III, 98. Planta 5
08028 Barcelona (Spain)
© Ficosa International, S.A. All rights Reserved
Mounting instructions
3
TCU H-D MY20
Telematics Control Unit
TCU Fixation
1. Bracket and TCU shall be mounted as shown in figure 1.
2. As detailed in figure 2, pokayokes from TCU shall be matched with bracket holes in
order to have screw holes aligned.
3. Screws (red in figure 3) shall be fastened to the TCU Cover applying a torque of 80-
90 in-lbs (9 – 10.2 Nm)
This TCU fixation is done in-vehicle and once mounted the part will not be reachable.
Figure 1. Bracket and TCU assembly
Figure 2. Bracket and TCU alignment
Figure 3. TCU screw position