ACR1255 NFC Bluetooth Smart Card Reader User Manual V1.00 Name Prepared by: Tommy Wong Signature Date 2015-05-28 Reviewed by: Approved by: Subject to change without prior notice info@acs.com.hk www.acs.com.
Table of Contents 1.0. Introduction ............................................................................................................. 3 1.1. 1.2. 1.3. 1.4. 1.5. NFC and Smart Card Reader ..............................................................................................3 Compact Design ..................................................................................................................3 Firmware ..........................................................................
1.0. Introduction ACR1255 NFC Bluetooth Smart Card Reader combines the latest 13.56 MHz contactless technology with Bluetooth Smart connectivity for on-the-go smart card and NFC applications. 1.1. NFC and Smart Card Reader ACR1255 supports ISO 14443 Type A and B smart cards, MIFARE®, FeliCa®, and most NFC tags and devices compliant with ISO 18092 standard.
2.0. Features USB 2.0 Full Speed Interface Bluetooth Low Energy (LE) 4.
o Bluetooth® QDL o Microsoft® WHQL o RoHS2 o REACH info@acs.com.hk Version 1.00 www.acs.com.
3.0. Typical Applications Mobile Banking & Payment e-Government e-Healthcare Network Security Access Control e-Purse & Loyalty Public Key Infrastructure info@acs.com.hk Version 1.00 www.acs.com.
4.0. Driver installation Procedure The installation procedure is the same for Unified PC/SC Driver version 4.0.0.2 and above. The latest device drivers of the ACS Smart Card Readers may be downloaded from the ACS Driver Download Webpage: http://acs.com.hk/en/drivers/ To install the ACS Driver: 1. In the ACS Unified Driver folder, run the file Setup.exe. 2. Select the language of your choice, and then click OK. 3. The Setup Wizard will be displayed. Click Next to proceed with the installation. info@acs.
4. Click Next to install the driver to the default folder located at X:\Program Files\Advanced Card Systems Ltd\ACS Unified PCSC Driver 4.0.0.2\, with X as the drive letter of you local drive. Otherwise, click Change to choose another destination folder. 5. Click Install to begin the installation. info@acs.com.hk Version 1.00 www.acs.com.
6. Wait for the installation process to finish. 7. Once the driver installation is finished, click Finish to exit the setup wizard. info@acs.com.hk Version 1.00 www.acs.com.
5.0. Technical Specifications Universal Serial Bus Interface Type ............................................... USB Full Speed, four lines: +5 V, GND, D+ and DPower Source................................. From USB Speed............................................. 12 Mbps Supply Voltage………………………Regulated 5V DC Supply Current………………………<250mA Battery Specification…………………Lithium-ion Battery (320mAh) Firmware ........................................
Certifications/Compliance EN60950/IEC 60950, ISO 18092, ISO 14443, NFC Forum, CE, FCC, VCCI, PC/SC, CCID, RoHS 2, REACH, USB Full Speed, Bluetooth® Smart, Microsoft® WHQL Windows® 2000, Windows® XP, Windows Vista®, Windows® 7, Windows® 8, Windows® 8.
