User's Manual

ZTH100 Operating Instructions

060902

HomePro

by ADVANCED CONTROL TECHNOLOGIES, INC.

4.6.5 RESETTING LAMP AND APPLIANCE MODULES (INCLUDES PLUG IN AND WALL MOUNT)

If a switch is to be moved to a new position or added to a new network, it has to be reset before doing so. This is done

using this menu.

4.6.6 RESET REMOTE TRANSMITTER

The remote transmitter can be reset in two different ways. User data only and factory default. User data only, will only

reset groups, scenes and names. The Remote Transmitter will still information about the modules that have been

added to the network. Factory default will clear the remote of all information, and it will clear groups, scenes, names

and will delete all modules from the network. A factory default reset should be used with extreme care.