TM StraitEdge2™ Inflatable Kayak Owner’s Manual MODEL AE1014 PATENTED 1 or 2 PERSON KAYAK IMPORTANT! PLEASE READ THIS MANUAL CAREFULLY BEFORE PROCEEDING. AFTER READING THIS MANUAL, SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ADVANCED ELEMENTS, INC.
TM technology inflatable kayaks with cutting edge INTRODUCTION It is our goal, at Advanced Elements, to develop new and unique paddlesports products that enhance our customers’ outdoor experience. Our focus is on designing and manufacturing “Inflatable kayaks with cutting edge technology”. Our kayaks incorporate many different materials and components and deliver high performance at a very reasonable price.
TABLE OF CONTENTS 1. Caution/Safety................................................................... 4 1.1 Boating Safety......................................................... 5 2. Specification....................................................................... 6 2.1 Capacity.................................................................. 6 2.2 Features................................................................... 6 3. Assembly/Inflating/Deflation Instruction..................... 7 3.
TM 1. CAUTION - SAFETY WARNING Users of this product agree by their use to accept the inherent risks involved in this paddlesports activity and agree to follow all instructions, cautions, and warnings carefully before using this Kayak. (PLEASE READ CAUTION STATEMENT CAREFULLY) CAUTION SAFETY WARNING PADDLESPORTS CAN BE VERY DANGEROUS AND PHYSICALLY DEMANDING. THE USER OF THIS PRODUCT SHOULD UNDERSTAND THAT PARTICIPATION IN PADDLESPORTS MAY INVOLVE SERIOUS INJURY OR DEATH.
StraitEdge2™ Inflatable Kayak Owner’s Manual 1.1 Boating Safety This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER WARNING CAUTION CAUTION NOTICE Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury or substantial property damage.
TM 2. SPECIFICATION Dimensions: Length: 13’ Width: 35” Weight: 47 lbs (21 kg) Max. Person Capacity: 500 lbs (227 kg) Max. Persons & Gear Capacity: 500 lbs (227 kg) Recommended Pressure: Main chambers: 2.25 psi (0.16 bar) Floor chamber: 1.0 psi (0.07 bar) Bow/Stern air bag: 1.0 psi (0.07 bar) 2.1 Capacity The person/load capacity is determined by the availability of proper seating on the kayak.
StraitEdge2™ Inflatable Kayak Owner’s Manual Bow and Stern Design The bow and stern have removable ribs of high grade aluminum. When the chambers are inflated these ribs press against the outer cover and form a high performance bow and stern. 3. ASSEMBLY/INFLATING/DEFLATION INSTRUCTION The StraitEdge™ Kayak has a rigid frame in the bow and stern that enhances its performance. 3.1 Assembly 1.
TM 3.2 Understanding Your Valves Advanced Elements StraitEdge™ kayak uses the following valves. The Advanced Elements spring valve has the function and durability of other military type valves and is compatible with most standard pumps. The lock nut holds the valve in place with the cover for easy inflation. The following figures will have details on how to operate the valves. To Inflate: The valve’s plunger stem should be in the up/outward position flush with the valve threading.
StraitEdge2™ Inflatable Kayak Owner’s Manual The valve adaptor also has a semi-circle protrusion that depresses the valve stem, opening the valve slightly to allow pumps with pressure gauges to take a constant reading. When inflating the kayak using the Spring Valve Adaptor, the valve should be in the inflate position.
TM Diagram of Inflation Chambers 3.3 Inflating IMPORTANT: Before inflating, check to be sure that the kayak is completely assembled. Inflate your kayak in the following order. Failure to follow these instructions may cause damage to your kayak. Do not over inflate. 1. Locate chamber 1. Unscrew cap and check that plunger valve is in the inflate position. Inflate Chamber 1 until firm to the touch (2.25 psi ONLY). 2. Proceed to chamber 2. Inflate chamber 2 until StraitEdge™ tube is firm to touch (2.
StraitEdge2™ Inflatable Kayak Owner’s Manual 3.5 Deflation 1. Remove the caps from chamber 1, 2, 4 and 5. 2. Push stems inward and rotate to deflate position. 3. Unscrew valve body to chamber 3 (See Figure 2). 4. Once the chambers are deflated you can use your pump to vacuum out any additional air to improve folding. 3.6 Folding NOTICE: Reverse your pump to completely deflate all chambers. 1. Completely deflate all air chambers and thoroughly dry the kayak and remove the seat. 2.
TM 4. GUIDELINES FOR USAGE Paddlesports can be very dangerous and physically demanding. The user of this product should understand that participation in paddlesports may involve serious injury or death. Observe the following safety standards whenever using this product. The user of this product acknowledges both an understanding and an assumption of the risk involved in paddlesports.
StraitEdge2™ Inflatable Kayak Owner’s Manual To change to a self-bailing kayak, locate the self-bailing ports and remove the caps as shown below. 5. PROPER CARE AND STORAGE Your inflatable kayak is made of very durable materials. However, like anything else, proper use and care will increase the life of your kayak. Before storing your kayak, make sure it is both CLEAN and DRY. You may clean your kayak with a mild soap and water.
TM 6. REPAIRS All kayaks come with a repair kit that includes glue and several patches. This should remain with the kayak in the event that you may need it. If service is required for your kayak, please call 866-262-9076 for assistance. 6.1 Repairing Small Punctures and Cuts 1. Cut a rounded patch at least ¼” or ½” larger than the hole or cut. 2. Clean the area where the patch will be placed with water and/or mild soap. 3. Make sure all surfaces are dry. 4.
StraitEdge2™ Inflatable Kayak Owner’s Manual PROBLEM Tube is kinked or bent. SOLUTION The tube just needs to be adjusted. When kayak is fully deflated try adjusting the position of the tube inside of the outer shell. The kayak is not self bailing. The kayak is a self bailing kayak. There are four port holes under each side of the kayak. The port holes have caps so it can be used as a self bailing or a dry kayak. Make sure the caps are off. There is water in the kayak.
PADDLING NOTES: It is alway a good idea to keep nots of your paddling experiences. Your notes can serve as a reminder of what to look out for, as well as what gear to bring along, and what conditions are like.
Note: If your state requires the licensing of this boat, please use the form below. If you need any assistance filling out this form, please contact Advanced Elements Customer Service Department.
Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014) Manufacturer’s Name: Advanced Elements, Inc. Manufacturer’s Address: P.O.
LIMITED WARRANTY Advanced Elements, Inc. warrants this product to be free from defects in material or workmanship for a period of one year from the date of purchase. Products that prove to be defective under conditions of normal and proper use during the warranty period because of defective workmanship or faulty material will be replaced or repaired without charge. For warranty service, contact Advanced Elements, Inc.
IMPORTANT! PLEASE READ THIS MANUAL CAREFULLY BEFORE PROCEEDING. AFTER READING THIS MANUAL, SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. If you would like a catalog of our latest products please visit our website at www.advancedelements.com or call Toll Free 866-262-9076 PLEASE COMPLETE THE OTHER SIDE OF THIS WARRANTY REGISTRATION CARD AND RETURN TO ADVANCED ELEMENTS, INC. PLACE STAMP HERE TM P.O. Box 5128 Concord, CA 94524 1-866-262-9076 www.advancedelements.com Email: info@advancedelements.