Owner manual

StraitEdge2™ Inatable Kayak Owners Manual
15
PROBLEM
Tube is kinked or bent.
The kayak is not self
bailing.
There is water in the
kayak.
The kayak dris to
one side.
The kayak does not
track well.
SOLUTION
The tube just needs to be adjusted. When kayak is fully deated try
adjusting the position of the tube inside of the outer shell.
The kayak is a self bailing kayak. There are four port holes under each
side of the kayak. The port holes have caps so it can be used as a self
bailing or a dry kayak. Make sure the caps are o.
There will almost always be a lile water in the kayak. One reason is
the water drips o of the paddle and into the kayak. The kayak is a self
bailing kayak. There are four port holes under each side of the kayak.
The port holes have caps so it can be used as a self bailing or a dry
kayak. Make sure the caps are on.
A kayak will always head in the direction of your last stroke. Make
sure to check that the air bags in the bow and stern are properly inated
and that the straps are pulled tight. If one of the oor bladders is not
completely inated, this will also cause the kayak to dri.
Try moving your seat forward a lile more. This will allow for beer
weight distribution and beer tracking.