Owners manual

HEININGER HOLDINGS, LLC
Makers of Advantage® Sports Rack, HitchMate® Cargo Products,
CommuteMate™ Travel Enhancements, GarageMate® Organization/Tools Products
2222 Queen Street, Bellingham, WA 98229-4753 USA
www.heininger.biz
E-Mail: [e-mail]
Phone: [phone], Fax: [phone],
Jan-06
BedRack™
Assembly and use Instructions-
To assemble quickly and properly read all instructions prior to assembly.
Once you open the box, make sure all of the components are enclosed. If you find a discrepancy, call us
and we will help you with any questions you may have. Our toll free number is 888-722-5240. If you call
on the weekend or after hours, leave a message and we will get back to you promptly. Our time zone is
PST.
BedRack Components
• 1 Lockable cable
• 4 Round feet
• 4 side adjustments with wing
nuts
• 8 Foam wheel stabilizers
• 2 Full-size spacers
• 4 détente pins
• 2 Base stabilizers
• 2 Side frames
Assembly Instructions:
1) Determine if you are going to be using the
BedRack in a compact or full-size pick-
up. Full-Size applications will need the 2
Full-size spacers. Insert at points A and B.
You do not need a spacer in the front.
The wheel slots slide on the side frames.
2) If you are using the BedRack™ for a
compact Pick-up you will not need the
spaces
3) Connect the two frames, making sure that the “buttons” snaps into place holding the 2 frames
together securely.
4) Remove the loose wing nut from each of the 4 side adjustments, then thread side adjustments in at
point C towards the outside of the rack, the stationary wing nut towards the inside of the rack.
Repeat for all 4 side adjustments on both side frames.
5) Thread on the remaining wing nuts on the outside of the side framed to secure the side
adjustments.
6) Press the round feet onto outside of side threaded adjusters as in point F
7) Connect the 2 base stabilizers with détente pins at point D to both the front and back of the
BedRack.
8) Slip the 8 foam wheel stabilizers on the stabilizing bars