User Manual AIMB-258 Intel® GM45 µFC-PGA 478 CoreTM2 Duo Mini ITX Motherboard with VGA, DVI, LVDS, 6 COM, Dual GbE, 8 USB, 2 SATA II, PCIe x 16 Ver.1.
Safety Information Electrical safety ! ! ! ! ! ! To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
Certifications This device complies with the requirements in part 15 of the FCC rules: Operation is subject to the following two conditions: ! This device may not cause harmful interference, ! This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
Technical Support If a problem arises with your system and no solution can be obtained from the user’s manual, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance. Visit the Advantech website for FAQ, technical guide, BIOS updates, driver updates, and other information: http://support.advantech.com.tw/Support/default.
Contents Chapter 1 Product Introduction ...........................1 1.1 1.2 Before You Proceed.................................................................................. 2 Motherboard Overview.............................................................................. 2 1.2.1 Placement Direction...................................................................... 2 1.2.2 Screw Holes.................................................................................. 3 Motherboard Layout ........
1.14.17Serial ATA Connector 1 & 2 (SATA1, SATA2) ........................... 27 1.14.18PCIe x 16 Slot (PCIE X 16)......................................................... 28 1.14.19SPI Flash Connector(SPI_CN1) ................................................. 28 1.14.20Memory Connector Channel A/B(DIMM1/2) ............................... 29 1.14.21SPDIF1 out connector(SPDIF1) ................................................. 29 1.14.22CF connector ............................................................
B.3 B.4 B.5 B.6 B.7 B.8 B.9 B.10 B.11 B.12 B.13 B.14 B.15 B.16 B.17 B.18 B.19 DVI Connector (VGA1B) ......................................................................... 64 Table B.3: DVI Connector (VGA1B)........................................... 64 RS-232 Serial Port (COM1~COM2) ........................................................ 65 Table B.4: RS-232 Serial Port (COM1~COM2) ......................... 65 RS-232 Serial Port (COM3 ~ COM6) ......................................................
AIMB-258 User Manual viii
Chapter 1 1 Product Introduction This chapter describes the main board features and the new technologies it supports.
1.1 Before You Proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. Caution! ! ! ! ! ! Unplug the power cord from the wall socket before touching any component. Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity Hold components by the edges to avoid touching the ICs on them.
Screw Holes Place four (4) screws into the holes indicated by circles to secure the motherboard to the chassis. Caution! Do not over tighten the screws! Doing so can damage the motherboard. 3 AIMB-258 User Manual Product Introduction Place this side towards the rear of the chassis. Chapter 1 1.2.
1.3 Motherboard Layout 1 2 2 1 4 3 1 2 3 6 PWR-SW RESET 4 8 5 7 3 4 SPEAKER 5 Figure 1.
CPU (45 nm µFC-PGA 478) Max. Speed Processor Sys- Front Side Bus tem L2 Cache Ethernet SATA SSD Rear I/O Internal Connector Watchdog Timer T9400 2.53 GHz 575 2.0 GHz 667/800/1066 MHz 667 MHz 6 MB 1 MB GM45 + ICH9M BIOS Award 16 Mbit, SPI PCI - PCIe x 16 4 GB/s per direction, 1 slot Technology DDR3 800/1066 MHz SDRAM Max.
Power Requirement Environment Power On Temperature Physical Dimensions Characteristics 5V 3.3 V 12 V 5 Vsb -12 V 0.99 A 2.67 A 2.07 A 0.17 A 0.08 A Operating Non-Operating 0 ~ 60°C (32 ~ 140°F) -20 ~ 70°C (-4 ~ 158°F) 170 mm x 170 mm (6.69’ x 6.69’) *Dual Display Clone uses both display pipes to drive the same content at the same resolution and color depth to two different displays. This configuration allows for different refresh rates on each display.
Chapter 1 1.6 Board Diagram VGA Channel A DDR3 800/1066 Channel A DDR3 800/1066 Dual Channel LVDS Intel GM45n 24-bit LVDS GMCH DVI PCI3 x 16 JMB368 PCIe x 1 2 SATA ports 300MB/s 8 USB Ports USB 2.0/1.
1.7 Ordering Information Part Number Display GbE SATA Serial CF AIMB-258G2-00A1E VGA/ DVI/ LVDS Dual 2 6 1.8 Riser Card Part Number Description AIMB-R430P-03A1E 2U riser card with 3 PCI slot expansion 1.9 Bracket View 1.10 Accessories Part Number Description 1700003195 USB cable with four ports, 17.5 cm 1700002204 USB cable with four ports, 27 cm 1700002314 USB cable with four ports, 30.
Chapter 1 1.11 Layout Content List Table 1.1: Jumper Setting List Label Function JSETCOM1 COM1/+5 V/+12 V Selection JSETCOM2 COM2 RS232/422/485 Mode Selection CMOS1 Clear CMOS LCD Power 3.3 V/5.5 V Selection PSON1 ATX, AT Mode Selection JWDT1 Watchdog Timer Output Option JOBS1 Hardware Monitor Product Introduction J1 Table 1.2: JSETCOM1: COM1/+5 V/+12 V Selection COM1 (Default) +5 V +12 V Table 1.
Table 1.3: JSETCOM2: COM2 RS232/422/485 Mode Selection RS-232 Configuration (default) RS-422 Configuration RS-485 Configuration Table 1.4: CMOS1: Clear CMOS Pins Result 1-2* Keep CMOS data* 2-3 Clear CMOS data *Default 1 1 Keep CMOS data Clear CMOS Table 1.5: J1:LCD Power 3.3 V/5.5 V Selection Closed Pins Result 1-2* 3.3 V* 2-3 5V *Default 1 1 3.3 V, 1-2 closed 5 V, 2-3 closed Table 1.
Chapter 1 Table 1.7: JWDT1: Watchdog Timer Output Option Closed Pins Result 1-2 NC 2-3* System Reset* *Default 1 1 System Reset, 2-3 closed Table 1.8: JOBS: HW monitor Closed Pins Result 1-2* Close: Enable OBS Alarm [Default] 1-2 Open: Disable OBS Alarm *Default 1 2 1 Close 2 Open 1.
Caution! ! ! ! ! Intel® socket 478 Pentium M/ Celeron M CPU with 90nm process package should come with installation instructions for the CPU, heatsink, and the retention mechanism. If the instructions in this section do not match the CPU documentation, follow the latter. Upon purchase of the motherboard, make sure that the PnP cap is on the socket and the socket contacts are not bent.
3. Position the CPU above the socket and the gold triangular mark on the CPU must align with pin 1 of the CPU socket. Carefully insert the CPU into the socket until it fits in place ‘Gold mark’. Turn the screw to the lock position. 4. 5. Product Introduction The processor socket comes with a screw to secure the processor, please unlock the screw first. Chapter 1 2. Warning! The CPU fits in only one correct orientation.
Warning! After installation, make sure to plug-in the ATX power cable to the motherboard. 1.12.2 Installing the CPU Heatsink and Fan The Intel® Pentium® M / Celeron® M processor (supports mPGA478M, MicroFCPGA) requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance.
Chapter 1 ! Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components, and hardware monitoring errors can occur if you fail to plug this connector. These are not jumpers! DO NOT place jumper caps on the fan connectors.
1.12.3 Uninstalling the CPU Heatsink and Fan 1. 2. 3. Disconnect the CPU fan cable from the connector on the motherboard. Rotate each screw counter- clockwise. Carefully remove the heatsink and fan assembly from the motherboard. Note! Refer to the documentation in the boxed or stand-alone CPU fan package for detailed information on CPU fan installation.
1.13.1 DIMM Sockets Location The motherboard comes with two 204-pin Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) sockets. The following figure illustrates the location of the sockets: Chapter 1 1.13 System Memory Product Introduction 1.13.2 System Memory The AIMB-258 has two sockets for 204-pin SODIMMx2. All these sockets use 1.5 V unbuffered double data rate synchronous DRAMs (DDR SDRAM). They are available in capacities of 256, 512, and 1024 MB.
1.13.3 Memory Support List Table 1.
1.14.1 Rear Panel Connectors 2, 3 1 8 7 4, 5 6 No. Label Function Description 1 KBMS1 PS/2 mouse connector The standard PS/2 mouse DIN connector is for a PS/2 mouse. 2 COM1(Top) Serial port connector x 1 D-sub 9-pin, male 3 COM2(Bottom) Serial port connector x 1 D-sub 9-pin, male 4,5 LAN1_USB12/ LAN (RJ-45) connector LAN2_USB34 This port allows Gigabit connection to a Local Area Network (LAN) through a network hub. Refer to the table 1.11 for the LAN port LED indications.
1.14.2 CPU Fan Connector (CPUFAN1) Caution! ! ! AIMB-258 User Manual Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components, and hardware monitoring errors can occur if you fail to plug this connector. These are not jumpers! DO NOT place jumper caps on the fan connectors.
Chapter 1 1.14.3 System Fan Connector (SYSFAN1, SYSFAN2) Product Introduction Caution! ! ! Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components, and hardware monitoring errors can occur if you fail to plug this connector. These are not jumpers! DO NOT place jumper caps on the fan connectors.
1.14.4 Serial Port Connector 3456 (COM3456) 1.14.5 Front Headphone Connector (HD1) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio. Connect one end of the front panel audio I/O module cable to this connector.
For motherboards with the optional HD Audio feature, we recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high definition audio capability. 1.14.6 Front Panel Connector (JFP1/JFP2/JFP3) Chapter 1 Note! Product Introduction There are several external switches to monitor and control the AIMB-258. 1.14.
1.14.11 Power LED and keyboard lock connector (JFP3 / PWR_LED&KEY LOCK) (JFP3 / PWR_LED&KEY LOCK) is a 5-pin connector for the power on LED and Key Lock function. Refer to Appendix B for detailed information on the pin assignments. The Power LED cable should be connected to pin 1-3. The key lock button cable should be connected to pin 4-5. There are 3 modes for the power supply connection. The first is “ATX power mode”, system is on/off by a tentative power button.
The USB module is purchased separately. 1.14.13 ATX Power Connector (ATX1) This connector is for an ATX Micro-Fit power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. Important notes on the Motherboard Power Requirements Note! ! ! Make sure that your ATX 12 V power supply can provide 6 A on the +12 V lead and at least 1A on the +5-volt standby lead (+5 VSB).
1.14.14 LCD Inverter Connector (VP1) 1.14.
Chapter 1 1.14.16 Digital I/O Connector (DIO_CN1) Product Introduction 1.14.17 Serial ATA Connector 1 & 2 (SATA1, SATA2) SATA1 SATA2 Note! AIMB-258 features a high performance serial ATA interface (up to 300 MB/s) which eases cabling to hard drives with thin and long cables.
1.14.18 PCIe x 16 Slot (PCIE X 16) 1.14.19 SPI Flash Connector(SPI_CN1) Note! This connector is for factory use only.
Chapter 1 1.14.20 Memory Connector Channel A/B(DIMM1/2) Product Introduction 1.14.
1.14.
Chapter 2 BIOS Operation 2
2.1 BIOS Introduction Advantech provides full-featured AwardBIOSes, which deliver the superior performance, compatibility, and functionality that today’s manufacturers of industrial PCs and embedded boards demand. The many options and extensions let you customize your products to a wide range of designs and target markets. The modular, adaptable AwardBIOS 6.
Press to enter AwardBIOS CMOS Setup Utility, the Main Menu will appear on the screen. Use arrow keys to select among the items and press to accept or enter the sub-menu. Chapter 2 2.2.1 Main Menu BIOS Operation ! ! ! ! ! ! ! ! ! ! ! Standard CMOS Features This setup page includes all the items in standard compatible BIOS. Advanced BIOS Features This setup page includes all the items of Award BIOS enhanced features.
2.2.2 Standard CMOS Features ! ! ! ! ! ! ! ! Date The date format is , , , . Weekday From Sun to Sat, determined and display by BIOS only Month From Jan. to Dec. Day From 1 to 31 Year From 1999 through 2098 Time The times format in , based on the 24-hour time IDE Channel 0/1/2, Master IDE HDD Auto-Detection Press "Enter" for automatic device detection. Video Select EGA or VGA display.
Chapter 2 2.2.3 Advanced BIOS Features ! ! ! ! Hard Disk Assign this boot device priority to Hard Disk. CDROM Assign this boot device priority to CDROM. USB-FDD Assign this boot device priority to USB-FDD. USB-ZIP Assign this boot device priority to USB-ZIP. USB-CDROM Assign this boot device priority to USB-CDROM. LAN Assign this boot device priority to LAN. Disabled Do not attempt to boot from this device. Boot Other Device Use this to boot another device.
! ! ! – Typematic Rate (Chars/Sec) This item controls the speed at which the system registers repeated keystrokes. The eight settings are 6, 8, 10, 12, 15, 20, 24 and 30. – Typematic Delay (Msec) This item sets the keypress delay before typematic repetition kicks in. The four delay options are 250, 500, 750 and 1000. Security Option [Setup] System System requires password both for bootup and for access to the Setup page. Setup Setup requires password only for access to the Setup page, not for bootup.
! ! ! ! ! 2.2.5 Integrated Peripherals Note! ! This “Integrated Peripherals” option controls the configuration of the board’s chipset, includes IDE, ATA, SATA, USB, AC97, MC97 and Super IO and Sensor devices; this page this page depends on the particular chipset installed.
! Onboard Device This item enables users to set the Onboard device status; it includes enable LAN1 and LAN2 devices. ! Super IO Device This item enables users to set the Super IO device status; it includes enabling COM1~COM6.
! ! ! ! 2.2.6 USE Device Setting ! ! ! ! ! USB 1.0 Controller Select “Enabled” if your system contains a Universal Serial Bus (USB) controller and you have USB peripherals. The choices are "Enabled" and "Disabled". USB 2.0 Controller This entry is used to disable/enable the USB 2.0 controller only. The BIOS itself may or may not have high-speed USB support. If the BIOS has high speed USB support built in, the support will automatically turn on when a high speed device is attached.
2.2.7 Power Management Setup Note! ! ! ! ! ! Use this "Power Management Setup" screen to configure the system for most effective power management while still operating in a manner consistent with intended computer use. PCI Express PM Function This allows you to enable or disable system wake up via PCI Express PME (Power Management Event). Power-Supply Type [ATX] This item allows user to set power-supply type, ATX or AT mode.
! Power Management [User Defined] This item allows user to select system power saving mode. Min Saving Minimum power management. Suspend Mode=1 hr. Max Saving Maximum power management. Suspend Mode=1 min. User Define Allows user to set each mode individually. Suspend Mode= Disabled or 1 min ~1 hr. Video Off Method [DPMS] This item allows user to determine the manner is which the monitor is blanked. ! ! ! ! ! ! ! ! ! ! ! Blank Screen This option only writes blanks to the video buffer.
2.2.8 PnP/PCI Configurations ! ! ! Reset Configuration Data [Disabled] The default is Disabled. Select Enabled to reset Extended System Configuration Data (ESCD) if you have installed a new add-on card, and system configuration is in such a state that the OS cannot boot, enable this. Resources Controlled By [Auto(ESCD)] The commands here are “Auto(ESCD)” or “Manual”. Choosing “Manual” requires you to choose resources from the following sub-menu.
! ! ! 2.2.10 Load Setup Defaults Note! Load Setup Defaults loads the default system values directly from ROM. If the stored record created by the Setup program should ever become corrupted (and therefore unusable), these defaults will load automatically when you turn the AIMB-258 Series system on. 2.2.11 Set Password 43 AIMB-258 User Manual BIOS Operation CPU Warning Temperature The system will give an automatic warning if the CPU temperature goes over the selected setting.
Note! To enable this feature, you should first go to the Advanced BIOS Features menu, choose the Security Option, and select either Setup or System, depending on which aspect you want password protected. Setup requires a password only to enter Setup. System requires the password either to enter Setup or to boot the system. A password may be at most 8 characters long. To Establish Password 1. Choose the Set Password option from the CMOS Setup Utility main menu and press . 2.
Chapter 3 Chipset Software Install Utility 3
3.1 Before you Begin To facilitate the installation of the enhanced display device drivers and utility software, you should read the instructions in this chapter carefully before you begin. The device drivers for the AIMB-258 board are located on the software installation CD. The auto-run function of the driver CD will guide you to the utilities and device drivers required for a Windows system. The Intel® Chipset Software Installation Utility is not required on any systems running Windows NT 4.0.
Insert the driver CD into your system's CD-ROM drive. You can see the driver folders items. Move the mouse cursor over the folder "Drv_INF". In Drv_INF folder, you can click "infinst_autol.exe" to complete the implement of the driver. Chapter 3 3.
AIMB-258 User Manual 48
Chapter 4 VGA Setup 4
4.1 Introduction The Intel GM45 integrated graphics controller provides an analog display port. You need to install the VGA driver to enable the function. Intel Graphics Media Accelerator 4500MHD: Incorporating the latest Microsoft* DirectX*10 support capabilities and Shader Model 4.0 features., it allows software developers to create lifelike environments and characters.
Chapter 5 5 LAN Configuration
5.1 Introduction The AIMB-258 features single/dual Gigabit Ethernet network interface. With the Realtek RTL8111C GbE controller designed-in, AIMB-258 implements the PCI Express host interface (PCI-E X1) in LAN connection with the maximum throughput of 2Gbps for heavy-duty industrial network application. 5.2 Features Integrated 10/100/100 BASE-T transceiver 1. 10/100/1000 BASE-T triple-speed MAC 2. High-speed RISC core with 24-KB cache 3. On-chip voltage regulation 4.
Chapter 5 Select the subdirectory based OS version; install the appropriate LAN driver.
AIMB-258 User Manual 54
Appendix A A Programming the Watchdog Timer
A.1 Programming the Watchdog Timer The AIMB-258's watchdog timer can be used to monitor system software operation and take corrective action if the software fails to function after the programmed period. This section describes the operation of the watchdog timer and how to program it. A.1.1 Watchdog timer overview The watchdog timer is built into the super I/O controller W83627UHG. It provides the following functions for user programming: ! Can be enabled and disabled by user's program.
Appendix A Programming the Watchdog Timer AIMB-258 User Manual 57
Table A.1: Watchdog Timer Registers Address of register (2E) Attribute Read/Write Value (2F) and description 87 (hex) - Write this address to I/O address port 2E (hex) twice to unlock the W83627UHG 07 (hex) write Write 08 (hex) to select register of watchdog timer. 30 (hex) write Write 01 (hex) to enable the function of the watchdog timer. Disabled is set as default. F5 (hex) write Set seconds or minutes as units for the timer. Write 0 to bit 3: set second as counting unit.
Appendix A Programming the Watchdog Timer A.1.3 Example Program 1. Enable watchdog timer and set 10 sec.
;----------------------------------------------------------Mov al,07h ; Select registers of watchdog timer Out dx,al Inc dx Mov al,08h Out dx,al ;----------------------------------------------------------Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Inc dx Mov al,01h Out dx,al ;----------------------------------------------------------Dec dx ; Set minute as counting unit Mov al,0f5h Out dx,al Inc dx In al,dx Or al,08h Out dx,al ;---------------------------------------------------------
61 AIMB-258 User Manual Appendix A Programming the Watchdog Timer Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Inc dx Mov al,01h Out dx,al ;----------------------------------------------------------Dec dx ; Enable watchdog timer to be reset by mouse Mov al,0f7h Out dx,al Inc dx In al,dx Or al,80h Out dx,al ;----------------------------------------------------------Dec dx ; lock W83627UHG Mov al,0aah Out dx,al 4.
;----------------------------------------------------------Dec dx ; lock W83627UHG Mov al,0aah Out dx,al 5.
Appendix B B Pin Assignments
B.1 USB Connector (USB56,USB78) 7 5 3 1 10 8 6 4 2 Table B.1: USB5/USB6 Connector (USB56) Pin USB1 Signal Pin USB2 Signal 1 +5 V 2 +5 V 3 LP5- 4 LP5+ 5 LP5+ 6 LP5- 7 GND 8 GND 9 NC 10 GND B.2 VGA Connector (VGA1A) 5 1 10 6 15 11 Table B.2: VGA Connector (VGA1A) Pin Signal Pin Signal 1 RED 9 VCC 2 GREEN 10 GND 3 BLUE 11 N/C 4 N/C 12 SDAT 5 GND 13 H-SYNC 6 GND 14 V-SYNC 7 GND 15 SCLK 8 GND Pin Signal B.3 DVI Connector (VGA1B) Table B.
6 GND 16 GND 7 GND 17 GND 8 GND 9 +5V_VGA 10 GND B.4 RS-232 Serial Port (COM1~COM2) 1 6 Table B.4: RS-232 Serial Port (COM1~COM2) Pin Signal 1 DCD/TX_422N/TX_485N 2 RXD/TX_422P/TX_485P 3 TXD/RX_422P 4 DTR/RX_422N 5 GND 6 DSR 7 RTS 8 CTS 9 RRI 65 AIMB-258 User Manual Appendix B Pin Assignments Table B.
B.5 RS-232 Serial Port (COM3 ~ COM6) Table B.
11 12 10 9 8 7 6 5 4 3 2 1 Table B.6: PS/2 Keyboard/ Mouse Connector (KBMS1) Pin Signal Pin Signal 1 KB DATA 2 NC 7 MS DATA 6 NC 3 GND 8 NC 4 VCC 9 GND 5 KB CLOCK 10 VCC 11 MS CLOCK 12 NC B.7 CPU Fan Power Connector (CPUFAN1) 1 2 3 Table B.7: CPU Fan Power Connector (CPUFAN1) Pin Signal 1 GND 2 +12 V 3 DEC 67 AIMB-258 User Manual Appendix B Pin Assignments B.
B.8 Power LED & Keyboard Lock Connector (JFP3) You can use an LED to indicate when the single board computer is on. Pin 1 of JFP3 supplies the LED's power, and Pin 3 is the ground. Table B.8: Power LED and Keylock Connector (JFP3) Pin Function 1 LED power (+5 V) 2 NC 3 GND 4 KEYLOCK# 5 GND B.9 HDD LED and External Speaker Connector(JFP2/HDD LED and SPEAKER) The single board computer has its own buzzer. You can also connect it to the external speaker on your computer chassis. Table B.
1 2 3 4 Table B.10: Audio Front Panel Connector (JFP1/ RESET) Pin Signal 1 PWR_BTN# 2 GND 3 RESET 4 GND B.11 Audio Front Panel Connector (FPAUD1) Table B.11: Audio front panel connector (FPAUD1) 1 MIC-IN 2 GND 3 MIC_VCC 4 VCC 5 LRR 6 LOUT_R 7 JDO 8 NC 9 LRL 10 LOUT_L 69 AIMB-258 User Manual Appendix B Pin Assignments B.
B.12 GPIO Pin Header (GPIO1) 1 2 3 4 17 18 19 20 Table B.
2 4 38 40 Table B.
B.14 LVDS Power Jumper (J1) Voltage Jumper Setting 1 *3.3V 2 3 1 5V 2 3 *default setting Table B.14: LVDS Power Jumper (J1) Pin Signal 1 VCC3 2 VDD_LCD 3 VCC B.15 LVDS Invert (VP1) Table B.
Appendix B Pin Assignments B.16 System I/O Ports Table B.16: System I/O Ports Addr.
B.18 Interrupt Assignments Table B.
Appendix B Pin Assignments AIMB-258 User Manual 75
www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd.
