Datasheet

Industrial USB I/O Modules
Features
USB-4751
USB-4751L
Specifications
Digital Input
 Channels USB-4751: 48 (shared with output)
USB-4751L: 24 (shared with output)
 Compatibility 5 V/TTL
 Input Voltage Logic 0: 0.8 V max.
Logic 1: 2 V min.
Digital Output
 Channels USB-4751: 48 (shared with input)
USB-4751L: 24 (shared with input)
 Compatibility 5 V/TTL
 Output Voltage Logic 0: 0.5 V max.
Logic 1: 3.8 V min.
 Output Capability Sink: 12 mA @ 0.5 V
Source: 12 mA @ 3.8 V for single channels
5 mA @ 3.8 V for all channels in high status
Counter/Timer
 Channels 2
 Resolution 32-bit
 Max. Input Frequency 8 MHz
General
 Bus Type USB 1.1/2.0
 I/O Connector 50-pin box headers, pin assignments are fully
compatible with Opto-22 I/O module racks
 Dimensions (L x W x H) 132 x 80 x 32 mm (5.2" x 3.15" x 1.26")
 Power Consumption Typical: 5 V @ 200 mA
Max.: 5 V @ 500 mA
 Operating Temperature 0 ~ 60°C (32 ~ 140°F)
 Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
 Storage Humidity 5 ~ 95% RH, non-condensing
Ordering Information
 USB-4751-AE 48-ch Digital I/O USB Module
 USB-4751L-AE 24-ch Digital I/O USB Module
Accessories
 1960004544 Wallmount Bracket
 1960005788 VESA Mount Bracket
 PCL-10150-1.2E 50-pin Flat Cable, 1.2 m
 ADAM-3950-AE 50-pin DIN-rail Flat Cable Wiring Board
 PCLD-782B-AE 24-ch IDI Board w/ 20-pin & 50-pin Flat Cables
 PCLD-785B-AE 24-ch Relay Board w/ 20- pin & 50-pin Flat Cables
Introduction
The USB-4700 series consists of true plug & play data acquisition devices. No more opening up your computer chassis to install boards; just plug in the module, then get the data. It’s
easy to use and efficient. USB-4751/4751L is a 48/24-bit digital I/O module with USB interface. Its 48/24 bits are divided into six/three 8-bit I/O ports and users can configure each
port as input or output via software. USB-4751/USB-4751L also provides one event counter and three 16-bit timers, which can be cascaded to become a 32-bit timer.
 Compatible with USB 1.1/2.0
 Portable
 Bus-powered
 48/24 TTL digital I/O lines
 Emulates mode 0 of 8255 PPI
 Buffered circuits for higher driving capacity than the 8255
 Interrupt handling capability
 Timer/Counter interrupt capability
 Supports both dry and wet contact
 50-pin Opto-22 compatible box header
 Suitable for DIN-rail mounting
 One lockable USB cable for secure connection included
48-ch Digital I/O USB Module
24-ch Digital I/O USB Module
RoHS
COMPLIANT
2002/95/EC
All product specifications are subject to change without notice Last updated : 5-May-2015