Operating instructions

4 . 2 H E A T I N G

R O O M H E A T I N G

Your home is fitted with a hot water central heating system, consisting of a heat exchanger unit,

under floor heating, a pump and controls. Water heated by the heat exchanger is pumped around

the under floor heating system through pipework concealed in the walls and floors.

Within each room or space a switched spur feeds the under floor heating via a wall mounted

controller (below) which provides temperature and time clock control. You should note that

heating from cold will take longer to achieve the desired temperature.

Heating is powered by a Evinox Heat Exchanger unit which is located in your hallway cupboard

(picture 1) and generates heating and hot water.. The on/off timer settings are controlled via the

Evinox wall mounted timer units (Picture 2 below).

Danfoss Heat Exchanger Wall mounted thermostat

For further information on configuring the system to your requirements, residents should refer

to the manufacturer’s operating instructions provided. A laminated copy double sided simple

step by step user guide was provided to you on handover.

A STEP BY STEP USER GUIDE IS PROVIDED SEPARATELY AS PART OF YOUR

HOMEOWNERS MANUAL. THIS IS A TWO SIDED LAMINATED DOCUMENT

WITH EASY STEPS WHICH MUST BE REFERRED TO BEFORE CALLING THE

MANAGING AGENT. IF THE STEPS ARE NOT FOLLOWED, YOU MAY BE

CHARGED FOR AN UNNECESSARY CALL OUT.