FAVORIT ÖKO45 NL AFWASAUTOMAAT EN DISHWASHER FR LAVE-VAISSELLE GEBRUIKSAANWIJZING USER MANUAL NOTICE D'UTILISATION 2 26 49
VOOR PERFECTE RESULTATEN Bedankt dat u voor dit AEG product heeft gekozen. Dit apparaat is ontworpen om vele jaren uitstekend te presteren, met innovatieve technologieën die het leven gemakkelijker helpen maken – functies die gewone apparaten wellicht niet hebben. Neem een paar minuten de tijd om het door te lezen zodat u er optimaal van kunt profiteren.
Inhoud 3 INHOUD 4 8 9 11 12 13 14 15 15 16 17 19 20 23 24 24 Veiligheidsinformatie Beschrijving van het product Bedieningspaneel Bediening van het apparaat De waterontharder instellen Gebruik van zout voor de afwasautomaat Gebruik van afwasmiddel en glansmiddel De Multitabfunctie De afwasautomaat inruimen Afwasprogramma's Een afwasprogramma selecteren en starten Onderhoud en reiniging Problemen oplossen Technische gegevens Milieubescherming Montage In deze gebruiksaanwijzing worden de volgende symbolen
Veiligheidsinformatie VEILIGHEIDSINFORMATIE Lees deze handleiding zorgvuldig alvorens het apparaat te installeren of te gebruiken: • Voor uw veiligheid en de veiligheid van uw eigendommen. • Om het milieu te helpen. • voor de correcte werking van het apparaat. Houd deze instructies altijd in de buurt van het apparaat, ook als u verhuist of het apparaat aan iemand anders geeft. De fabrikant is niet verantwoordelijk voor schade veroorzaakt door een foutieve installatie.
Veiligheidsinformatie 5 • Plaats de messen en alle voorwerpen met scherpe punten met de punt naar beneden in de bestekmand. Als dat niet past, leg ze dan horizontaal op het bovenrek of in het messenrek. (Niet alle modellen hebben een messenrek). • Gebruik alleen gespecificeerde producten voor afwasmachines (afwasmiddel, zout, glansspoelmiddel). • Zout dat niet gespecificeerd is voor afwasmachines, veroorzaakt schade aan de waterontharder. • Vul het apparaat met zout voordat u een afwasprogramma start.
Veiligheidsinformatie Wateraansluiting • Gebruik nieuwe slangen om het apparaat aan te sluiten op de watertoevoer. Gebruik geen gebruikte slangen. • Sluit het apparaat niet op nieuwe leidingen aan of op leidingen die lang niet zijn gebruikt. Laat het water enkele minuten stromen en sluit dan de toevoerslang pas aan. • Zorg ervoor dat de waterslangen niet knakken of beschadigd raken bij installatie van het apparaat. • Zorg er voor dat de waterkoppelingen stevig vast zitten om waterlekkage te voorkomen.
Veiligheidsinformatie 7 • Zorg ervoor dat het netsnoer na installatie bereikbaar is. • Trek niet aan het netsnoer om het apparaat los te koppelen. Trek altijd aan de stekker. Service-afdeling • Alleen een erkende persoon mag dit apparaat repareren. Neem contact op met het servicecentrum. • Gebruik alleen originele reserveonderdelen. Het apparaat wegdoen • Om lichamelijk letsel of schade te voorkomen: – Trek de stekker uit het stopcontact. – Snij het netsnoer van het apparaat af en gooi dit weg.
Beschrijving van het product BESCHRIJVING VAN HET PRODUCT 10 1 9 2 3 8 7 4 5 1 2 3 4 5 6 7 8 9 10 Bovenkorf Waterhardheidsknop Zoutreservoir Wasmiddeldoseerbakje Glansmiddeldoseerbakje Typeplaatje Filters Onderste sproeiarm Bovenste sproeiarm Bovenblad 6
Bedieningspaneel 9 BEDIENINGSPANEEL 2 1 1 2 3 4 5 6 7 8 9 3 4 9 8 5 6 7 Aan-/uit-toets Programmagids Program-toets Programma-indicatielampjes Display Delay-toets Start-toets Indicatielampjes Option-toets Indicatielampjes Multitab-indicatielampje. Gaat aan als u de functie inschakelt. ÖKO PLUS-indicatielampje. Gaat aan als u de functie inschakelt. Wasfase-indicatielampje. Gaat aan wanneer de wasfase loopt. Spoelfase-indicatielampje. Gaat aan wanneer de spoelfase loopt. Droogfase-indicatielampje.
Bedieningspaneel Indicatielampjes Zoutindicatielampje. Gaat aan wanneer het zoutreservoir bijgevuld moet worden. 1) Het indicatielampje voor zout blijft enkele uren aan nadat u het reservoir hebt bijgevuld. Dit heeft geen ongewenst effect op de werking van het apparaat. Delay-indicatielampje. Gaat aan als u de uitgestelde start ingeschakeld heeft. Deur-indicatielampje. Gaat aan als de deur open staat of niet goed is gesloten.
Bediening van het apparaat Option-toets Multitabfunctie 11 ÖKO PLUS Eén keer drukken INGESCHAKELD UITGESCHAKELD Twee keer indrukken UITGESCHAKELD INGESCHAKELD Drie keer indrukken INGESCHAKELD INGESCHAKELD Vier keer indrukken UITGESCHAKELD UITGESCHAKELD Functies Multitabfunctie Als u gecombineerde afwasmiddeltabletten gebruikt ('3 in 1', '4 in 1', '5 in 1', enz.), gebruikt u de multitab-functie. Zie 'Multitabfunctie'. ÖKO PLUS Met deze functie wordt de temperatuur in de droogfase verlaagd.
De waterontharder instellen 7. Start het afwasprogramma. Als u gecombineerde afwasmiddeltabletten gebruikt ('3 in 1', '4 in 1', '5 in 1' enz.), gebruikt u de multitabfunctie (zie 'De Multitabfunctie'). DE WATERONTHARDER INSTELLEN De waterontharder verwijdert mineralen en zouten van de watertoevoer. Deze mineralen en zouten kunnen schade aan het apparaat toebrengen. Pas het niveau van de waterontharder aan als dit niveau niet overeenstemt met de hardheid van het water in uw omgeving.
Gebruik van zout voor de afwasautomaat 13 Handmatig instellen Zet de schijf voor de waterhardheid in stand 1 of 2 (zie de tabel). Elektronische instelling 1. Schakel het apparaat in. 2. Zorg dat het apparaat in de instelmodus staat. 3. Houd de toetsen Delay en Start tegelijkertijd ingedrukt tot de programma-indicatielampjes AUTO, PRO en SILENT knipperen. 4. Laat de toetsen Delay en Start los. 5. Druk op de toets Program, • De programma-indicatielampjes PRO en SILENT gaan uit.
Gebruik van afwasmiddel en glansmiddel GEBRUIK VAN AFWASMIDDEL EN GLANSMIDDEL 1 3 2 4 30 7 4 MA X + 3 2 - 1 20 6 5 Gebruik van afwasmiddel Gebruik niet meer dan de juiste hoeveelheid afwasmiddel om het milieu te beschermen. Volg het advies van de afwasmiddelfabrikant op de verpakking. Het afwasmiddeldoseerbakje vullen: 1. Druk op de vrijgaveknop 2 om het deksel te openen 7 van het afwasmiddelbakje. 2. Doe het afwasmiddeltablet in het afwasmiddeldoseerbakje 1 . 3.
De Multitabfunctie 4. 15 Sluit het glansmiddeldoseerbakje. Druk op het deksel totdat het op zijn plaats klikt. Stel de glansmiddeldosering in Fabrieksinstelling: stand 3. U kunt de dosering van het glansmiddel instellen tussen stand 1 (laagste dosering) en stand 4 (hoogste dosering). Draai de glansmiddelknop 4 om de dosering te vergroten of te verkleinen. DE MULTITABFUNCTIE De multitabfunctie is voor gecombineerde afwastabletten.
Afwasprogramma's • • • • • • Zorg ervoor dat zich geen water kan ophopen in opbergdozen of kommen. Zorg ervoor dat serviesgoed en bestek niet in elkaar liggen. Zorg ervoor dat glazen andere glazen niet aanraken. Leg kleine voorwerpen in de bestekmand. Meng lepels met ander bestek om te voorkomen dat ze aan elkaar kleven. Als u de voorwerpen in de manden plaatst, zorg er dan voor dat het water alle oppervlakken kan bereiken. • Leg lichte voorwerpen in het bovenrek.
Een afwasprogramma selecteren en starten Programma Soort vuil Normaal of licht bevuild Type lading Programmabeschrijving Teer serviesgoed en glaswerk Wassen 45 °C Spoelgangen Drogen 17 ÖKO PLUSfunctie Ja, met effect 1) Het apparaat detecteert het soort vuil en de hoeveelheid serviesgoed in de korven. De temperatuur en hoeveelheid water, het energieverbruik en de programmatijd worden automatisch aangepast. 2) Dit is het meest stille afwasprogramma.
Een afwasprogramma selecteren en starten 6. Druk op de Start-toets. Het afwasprogramma start automatisch. • De fase-indicatielampjes gaan uit, maar het indicatielampje van de fase die op dit moment in werking is, blijft aan. Het afwasprogramma starten met uitgestelde start 1. 2. 3. 4. 5. Sluit de deur van het apparaat. Schakel het apparaat in. Zorg dat het apparaat in de instelmodus staat. Stel het afwasprogramma en de functies in.
Onderhoud en reiniging 19 Als u de selectie wilt veranderen terwijl een afwasprogramma in werking is, moet u het programma annuleren. • Druk tegelijkertijd op de toetsen Delay en Start en houdt deze toetsen ingedrukt totdat: – Alle programmalampjes aan gaan. – de display twee horizontale statusstreepjes weergeeft. Controleer of er afwasmiddel in het afwasmiddeldoseerbakje aanwezig is voordat u een nieuw afwasprogramma start.
Problemen oplossen 2. Filter (A) heeft twee delen. Haal de twee delen uit elkaar om het filter te demonteren. 3. Maak de onderdelen schoon onder stromend water. 4. Plaats de twee delen van filter (A) tegen elkaar en druk ze samen. Zorg ervoor dat ze goed worden gemonteerd. 5. Verwijder filter (B). 6. Maak filter (B) schoon onder stromend water. 7. Zet filter (B) op de oorspronkelijke plaats terug. Zorg ervoor dat het filter goed wordt gemonteerd in de twee geleiders (C). 8.
Problemen oplossen 21 WAARSCHUWING! Schakel het apparaat uit voordat u de controles uitvoert. Storing Het apparaat wordt niet gevuld met water. Het apparaat pompt geen water weg. Mogelijke oorzaak De waterkraan is verstopt of aangezet met kalkaanslag. Maak de waterkraan schoon. De waterdruk is te laag. Neem contact op met de waterleidingsmaatschappij. De waterkraan is dicht. Draai de waterkraan open. Het filter in de wateraanvoerslang is verstopt. Maak het filter schoon.
Problemen oplossen Leg deze informatie vast: – Model (MOD.) ........................................................ – Productnummer (PNC) .......................................... – Serienummer (S.N.) .............................................. De afwas- en droogresultaten zijn niet bevredigend Probleem De borden zijn niet schoon. Er zitten kalkresten op de borden. De glazen en borden vertonen strepen, witachtige vlekken of een blauwzweem.
Technische gegevens Probleem Mogelijke oorzaak Mogelijke oplossing De multitabfunctie is ingescha- Schakel het glansmiddeldoseerkeld (deze functie schakelt het bakje in. glansmiddeldoseerbakje automatisch uit). Het glansmiddeldoseerbakje inschakelen 1. Schakel het apparaat in. 2. Zorg dat het apparaat in de instelmodus staat. 3. Houd de toetsen Delay en Start tegelijkertijd ingedrukt tot de programma-indicatielampjes AUTO, PRO en SILENT knipperen. 4. Laat de knoppen Delay en Start los. 5.
Milieubescherming MILIEUBESCHERMING Het symbool op het product of op de verpakking wijst erop dat dit product niet als huishoudafval mag worden behandeld, maar moet worden afgegeven bij een verzamelpunt waar elektrische en elektronische apparatuur wordt gerecycled. Als u ervoor zorgt dat dit product op de juiste manier wordt verwijderd, voorkomt u mogelijke negatieve gevolgen voor mens en milieu die zich zouden kunnen voordoen in geval van verkeerde afvalverwerking.
Montage 25 2. Trek het werkblad van de achterkant van het apparaat (2). 3. Til het werkblad op en haal het uit de voorste gleuven (3). 4. Gebruik de afstelbare voetjes om het apparaat waterpas te zetten. 5. Installeer het apparaat onder het werkblad van de keuken. De waterslangen tijdens de installatie niet pletten of buigen. Het niveau van het apparaat afstellen Zorg ervoor dat het apparaat waterpas staat, zodat de deur goed kan sluiten en afgedicht is.
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 27 CONTENTS 28 31 32 34 35 36 37 38 38 39 40 42 43 46 46 46 Safety information Product description Control panel Use of the appliance Setting the water softener Use of dishwasher salt Use of detergent and rinse aid Multitab function Loading cutlery and dishes Washing programmes Select and start a washing programme Care and cleaning What to do if… Technical data Environment concerns Installation The following symbols are used in this user manual: Important information concerning your personal sa
Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your safety and the safety of your property. • To help the environment. • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or give it to a different person. The manufacturer is not responsible if an incorrect installation and use causes damage.
Safety information 29 • Fill the appliance with salt before you start a washing programme. Remaining salt in the appliance can cause corrosion or make a hole in the bottom of the appliance. • Do not fill the rinse aid dispenser with other products than the rinse aid, (dishwasher cleaning agent, liquid detergent). This can cause damage to the appliance. • Make sure that the spray arms can move freely before you start a washing programme.
Safety information • The water inlet hose has a safety valve and a double sheath with an inner mains cable. There is pressure in the water inlet hose only when the water flows. If there is a leak in the water inlet hose, the safety valve interrupts the flow of water. – Be careful when you connect the water inlet hose: – Do not put the water inlet hose or the safety valve in water. – If the water inlet hose or the safety valve are damaged, immediately disconnect the mains plug from the mains socket.
Product description 31 – Remove the door catch. This prevents children or pets to be closed in the appliance. There is a risk of suffocation. – Discard the appliance at the local waste disposal centre. WARNING! The dishwasher detergents are dangerous and can cause corrosion ! • If an accident occurs with these detergents, contact immediately a physician. • If the detergent gets into the mouth, contact immediately a physician.
Control panel 10 Worktop CONTROL PANEL 2 1 1 2 3 4 5 6 7 8 9 3 4 9 8 5 6 7 On/off button Programme guide Program button Programme indicators Display Delay button Start button Indicators Option button Indicators Multitab indicator. It comes on when you activate the function. ÖKO PLUS indicator. It comes on when you activate the function. Washing phase indicator. It comes on when the washing phase operates. Rinsing phase indicator. It comes on when the rinsing phases operate.
Control panel 33 Indicators Salt indicator. It comes on when it is necessary to fill the salt container. 1) After you fill the container, the salt indicator can stay on for some hours. This does not have an unwanted effect on the operation of the appliance. Delay indicator. It comes on when you activate the delay start. Door indicator. It comes on when the door is open or not closed correctly.
Use of the appliance Option button Multitab ÖKO PLUS Press one time ACTIVATED DEACTIVATED Press two times DEACTIVATED ACTIVATED Press three times ACTIVATED ACTIVATED Press four times DEACTIVATED DEACTIVATED Functions Multitab If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function. Refer to 'Multitab function'. ÖKO PLUS This function decreases the temperature in the drying phase. The power consumption decreases by 25%.
Setting the water softener 35 7. Start the washing programme. If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function (refer to 'Multitab function'). SETTING THE WATER SOFTENER The water softener removes minerals and salts from the water supply. These minerals and salts can cause damage to the appliance. Adjust the level of the water softener if this does not agree with the water hardness in your area.
Use of dishwasher salt Electronic adjustment 1. Activate the appliance. 2. Make sure that the appliance is in setting mode. 3. Press and hold the Delay button and the Start button at the same time until the programme indicators AUTO, PRO and SILENT flash. 4. Release the Delay button and the Start button. 5. Press the Program button, • The programme indicators PRO and SILENT go off. • The programme indicator AUTO continues to flash. = level 5).
Use of detergent and rinse aid 37 USE OF DETERGENT AND RINSE AID 1 3 2 4 30 7 4 MA X + 3 2 - 1 20 6 5 Use of detergent To help the environment, do not use more than the correct quantity of detergent. Obey the instructions on the detergent packaging. How to fill the detergent dispenser: 1. Press the release button 2 to open the lid 7 of the detergent dispenser. 2. Put the detergent in the dispenser 1 . 3.
Multitab function You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (highest dosage). Turn the rinse aid selector 4 to increase or decrease the dosage. MULTITAB FUNCTION The multitab function is for combi detergent tablets. These tablets contain agents as detergent, rinse aid and dishwasher salt. Some types of tablets can contain other agents.
Washing programmes • • • • 39 Mix the spoons with other cutlery to prevent them to bond together. When you put the items in the baskets, make sure that the water can touch all surfaces. Put light items in the upper basket. Make sure that the items do not move. Water droplets can collect on plastic items and non-stick pans.
Select and start a washing programme Energy (kWh) Programme1) Water (litre) 1,1 - 1,2 10 - 11 0,9 - 1,0 8-9 0,8 7 0,7 - 0,8 8-9 0,8 - 0,9 8-9 0,6 - 0,7 9 - 10 1) The display shows the programme time. The water pressure and temperature, the variations of the mains supply and the quantity of dishes can change the consumption values. SELECT AND START A WASHING PROGRAMME Starting the washing programme without delay start 1. 2. 3. 4. Close the appliance door. Activate the appliance.
Select and start a washing programme 41 • The delay start time flashes no more in the display. • The phase indicators of the set washing programme go off. • When the countdown is completed, the washing programme starts automatically. – The indicator of the phase in operation is on. The opening of the appliance door stops the countdown. When you close the door, the countdown continues from the point of interruption. Cancelling the delay start The countdown is not operating 1.
Care and cleaning Remove the items from the baskets • Let the dishes become cold before you remove them from the appliance. Hot dishes can be easily damaged. • First remove the items from the lower basket, then from the upper basket. • There can be water on the sides and on the door of the appliance. Stainless steel becomes cool more quickly than the dishes. CARE AND CLEANING To remove and clean the filters Dirty filters decrease the washing results.
What to do if… 7. Put the filter (B) to its initial position. Make sure that it engages correctly in the two guides (C). 8. Put the filter (A) into position in filter (B). Turn the filter (A) clockwise until it locks. C To clean the spray arms Do not remove the spray arms. If the holes in the spray arms become clogged, remove remaining parts of soil with a thin pointed object. To clean the external surfaces Clean the external surfaces of the appliance and control panel with a moist soft cloth.
What to do if… Malfunction The appliance does not drain the water. Possible cause The water inlet hose is damaged. Make sure that the water inlet hose has no damages. There is a blockage in the sink spigot. Clean the sink spigot. The connection of the water drain hose is not correct. Make sure that the connection is correct. The water drain hose is damaged. Make sure that the water drain hose has no damages. The anti-flood device is on. The start of the washing programme does not occur.
What to do if… Problem 45 Possible cause Possible solution The spray arms could not turn freely. Incorrect position of the items in the baskets. Make sure that an incorrect position of the items do not cause the blockage of the spray arms. The filters are dirty or not asMake sure that the filters are sembled and installed correctly. clean and correctly assembled and installed. The quantity of detergent was not sufficient or missing. Make sure that the quantity of detergent is sufficient.
Technical data The rinse aid dispenser is off. The rinse aid dispenser is on. 6. Press button Option to change the setting. 7. Deactivate the appliance to confirm. TECHNICAL DATA Dimensions Width Height Depth Electrical connection Voltage Overall power Fuse Frequency Water supply pressure min. max. Water supply 1) Cold water or hot water Capacity Place settings 446 mm 850 mm 620 mm 220-240 V 2100 W 10 A 50 Hz 0,5 bar (0,05 MPa) 8 bar (0,8 MPa) max.
Installation 47 Make sure that the dimensions of the recess agree with the dimensions in the picture. How to remove the appliance worktop 1. Remove the rear screws (1). 2. Pull the worktop from the behind of the appliance (2). 3. Lift the worktop and move it from the front slots (3). 4. Use the adjustable feet to adjust the level of the appliance. 5. Install the appliance under the kitchen worktop. Do not squash or bend the water hoses during the installation.
Installation • A stand pipe with vent-hole. The internal diameter must be minimum 40 mm. Remove the sink plug when the appliance drains the water to prevent that the water goes back into the appliance. The drain hose extension must not be longer than 2 m. The internal diameter must not be smaller than the diameter of the hose. If you connect the water drain hose to a trap spigot under the sink, remove the plastic membrane (A).
POUR DES RÉSULTATS PARFAITS Merci d'avoir choisi ce produit AEG. Nous l'avons créé pour vous offrir la meilleure performance pour une longue durée, avec des technologies innovantes qui vous simplifient la vie - autant de caractéristiques que vous ne trouverez pas sûrement pas sur d'autres appareils. Veuillez prendre quelques instants pour lire cette notice afin d'utiliser au mieux votre appareil.
Sommaire SOMMAIRE 51 55 56 58 59 60 61 62 62 63 64 66 67 70 71 71 Consignes de sécurité Description de l'appareil Bandeau de commande Utilisation de l'appareil Réglage de l'adoucisseur d'eau Utilisation du sel régénérant Utilisation du produit de lavage et du liquide de rinçage Fonction "Tout en 1" Rangement des couverts et de la vaisselle Programmes de lavage Sélection et départ d'un programme de lavage Entretien et nettoyage En cas d'anomalie de fonctionnement Caractéristiques techniques En matière
Consignes de sécurité 51 CONSIGNES DE SÉCURITÉ Lire attentivement cette notice d'utilisation avant l'installation et l'utilisation de l'appareil : • Pour votre sécurité et la sécurité de votre appareil. • Pour protéger l'environnement. • Pour le bon fonctionnement de l’appareil. Conservez cette notice d'utilisation avec l'appareil. Si vous déménagez ou si l'appareil est cédé à une autre personne, assurez-vous que la notice d'utilisation l'accompagne.
Consignes de sécurité • Les couteaux et autres ustensiles pointus ou tranchants doivent être placés dans le panier à couverts avec la pointe vers le bas, ou placez-les en position horizontale dans le panier supérieur ou dans le panier à couteaux (tous les modèles ne sont pas équipés d'un panier à couteaux). • N'utilisez que des produits (sel, produit de lavage, liquide de rinçage) spécifiques pour lave-vaisselle.
Consignes de sécurité 53 Tuyau d’arrivée d’eau • Utilisez des tuyaux neufs pour raccorder l'appareil à l'arrivée d'eau. N’utilisez pas de tuyaux usagés. • Ne raccordez pas l’appareil à des conduites neuves ou qui n’ont pas été utilisées depuis longtemps. Laissez couler l’eau pendant quelques minutes avant de brancher le tuyau d’arrivée d’eau. • Veillez à ne pas écraser ou endommager les tuyaux d'eau lorsque vous installez l'appareil.
Consignes de sécurité • Attention à ne pas écraser ou endommager la prise et le câble d'alimentation situés à l'arrière de l'appareil. • Assurez-vous que la prise principale est accessible une fois l'appareil installé. • Ne tirez jamais sur le câble d'alimentation électrique pour débrancher l'appareil. Détachez, pour ce faire, la fiche de la prise secteur. Service après-vente • Toute intervention ou réparation sur votre appareil doit uniquement être effectuée par une personne qualifiée.
Description de l'appareil DESCRIPTION DE L'APPAREIL 10 1 9 2 3 8 7 4 5 1 2 3 4 5 6 7 8 9 10 Panier supérieur Sélecteur de dureté de l'eau Réservoir de sel régénérant Distributeur de produit de lavage Distributeur de liquide de rinçage Plaque de calibrage Filtres Bras d'aspersion inférieur Bras d'aspersion supérieur Plan de travail 6 55
Bandeau de commande BANDEAU DE COMMANDE 2 1 1 2 3 4 5 6 7 8 9 3 4 9 8 5 6 7 Touche Marche/Arrêt Guide des programmes Touche Program Voyants de programme Écran Touche Delay Touche Start Voyants Touche Option Voyants Voyant Tout en 1 Il s'allume lorsque la fonction est activée. Voyant ÖKO PLUS Il s'allume lorsque la fonction est activée. Symboles de déroulement du lavage Il s'allume quand la phase de lavage est en cours.
Bandeau de commande 57 Voyants Voyant du réservoir à sel Il s'allume lorsque le réservoir de sel régénérant doit être rempli. 1) Le voyant de réapprovisionnement en sel régénérant peut rester allumé plusieurs heures après le remplissage du réservoir à sel. Cela n'affecte pas le fonctionnement de l'appareil. Voyant Delay Il s'allume lorsque la fonction de départ différé est activée. Voyant de porte Il s'allume quand la porte est ouverte ou n'a pas été fermée correctement.
Utilisation de l'appareil Touche Option Appuyez sur cette touche pour régler les fonctions. Si la fonction est activée, le voyant correspondant s'allume. Touche Option Tout en 1 ÖKO PLUS Appuyez une fois. ACTIVÉ DÉSACTIVÉ Appuyez deux fois. DÉSACTIVÉ ACTIVÉ Appuyez trois fois. ACTIVÉ ACTIVÉ Appuyez quatre fois. DÉSACTIVÉ DÉSACTIVÉ Fonctions « Tout en 1 » Si vous utilisez des pastilles de détergent multifonctions (« 3 en 1 », « 4 en 1 » « 5 en 1 », etc.
Réglage de l'adoucisseur d'eau 3. 4. 5. 6. 7. 59 Remplissez le distributeur de liquide de rinçage. Rangez les couverts et la vaisselle dans le lave-vaisselle. Sélectionnez le programme de lavage en fonction de la charge et du degré de salissure. Remplissez le réservoir avec la quantité nécessaire de produit de lavage. Démarrez le programme de lavage. Si vous utilisez des pastilles de détergent multifonctions (« 3 en 1 », « 4 en 1 » « 5 en 1 », etc.
Utilisation du sel régénérant Réglage manuel Tournez le sélecteur de dureté de l'eau sur 1 ou 2 (reportez-vous au tableau). Réglage électronique 1. Mettez en fonctionnement l'appareil. 2. Contrôlez que l'appareil est en mode Programmation. 3. Appuyez simultanément sur les touches Delay et Start, jusqu'à ce que les voyants des programmes AUTO, PRO et SILENT commencent à clignoter. 4. Relâchez les touches Delay et Start. 5. Appuyez sur la touche Program.
Utilisation du produit de lavage et du liquide de rinçage 61 Il est normal que de l'eau s'écoule du réservoir lorsque vous le remplissez de sel. UTILISATION DU PRODUIT DE LAVAGE ET DU LIQUIDE DE RINÇAGE 1 3 2 4 30 7 4 MA X + 3 2 - 1 20 6 5 Utilisation du produit de lavage Afin de préserver l'environnement, n'utilisez que la quantité nécessaire de produit de lavage. Respectez les recommandations fournies par le fabricant du produit de lavage qui figurent sur l'emballage du produit.
Fonction "Tout en 1" 1. 2. 3. 4. Appuyez sur la touche de déverrouillage 6 afin d'ouvrir le couvercle 5 du distributeur de liquide de rinçage. Remplissez le distributeur de liquide de rinçage 3 de liquide de rinçage. Le repère 'max.' indique le niveau maximum. Essuyez tout débordement de liquide de rinçage à l'aide de papier absorbant, afin d'éviter une formation excessive de mousse lors du lavage. Vérifiez que le couvercle est fermé après chaque remplissage.
Programmes de lavage 63 Conseils et astuces • Les éponges, les chiffons de nettoyage et tout autre objet absorbant l'eau ne doivent pas être lavés au lave-vaisselle. • Enlevez tous les restes d'aliments. • Laissez tremper les casseroles au fond desquelles adhèrent des restes d'aliments brûlés ou attachés. • Chargez les articles creux, tels que tasses, verres, casseroles, etc. en les retournant, • de manière à ce que l'eau ne s'accumule pas dans le creux ou dans un fond bombé.
Sélection et départ d'un programme de lavage Programme Niveau de salissure Type de charge Description de programmes Fonction ÖKO PLUS Légèrement sale Vaisselle et couverts Lavage 55 °C Rinçages Oui, sans effet Normalement ou légèrement sale Vaisselle délicate et verres Lavage 45 °C Rinçages Séchage Oui, avec impact 1) L'appareil réagit différemment suivant le degré de salissure et la quantité d'articles insérés dans les paniers.
Sélection et départ d'un programme de lavage 65 5. Si nécessaire, réglez la fonction ÖKO PLUS. • La sélection de ces fonctions ne s'effectuera qu'après avoir réglé le programme de lavage. 6. Appuyez sur la touche Start, le programme de lavage sélectionné démarre automatiquement. • Les voyants de phase s'éteignent, mais le voyant de la phase en cours reste allumé. Lancement du programme de lavage avec départ différé 1. 2. 3. 4. 5. Fermez la porte de l'appareil. Mettez en fonctionnement l'appareil.
Entretien et nettoyage Annulation du programme de lavage Si le programme de lavage ou un départ différé n'a pas encore démarré, vous pouvez changer la sélection. Pour modifier la sélection lorsque le programme a démarré, vous devez annuler le programme. • Appuyez simultanément sur les touches Delay et Start jusqu'à ce que : – Tous les voyants du programme s'allument. – Deux lignes horizontales apparaissent sur l'affichage.
En cas d'anomalie de fonctionnement 67 2. Le filtre (A) est constitué de 2 pièces. Pour démonter le filtre, séparez-les. 3. Nettoyez soigneusement les filtres avec de l’eau. 4. Rassemblez les 2 pièces du filtre (A) et poussez. Vérifiez qu'elles s'emboîtent correctement. 5. Retirez le filtre (B). 6. Nettoyez soigneusement le filtre (B) avec de l’eau. 7. Replacez le filtre (B) dans sa position initiale. Vérifiez qu'il est correctement emboîté dans les deux guides (C). 8.
En cas d'anomalie de fonctionnement • - Le système de sécurité anti-débordement s'est déclenché. AVERTISSEMENT Mettez à l'arrêt l'appareil avant d'effectuer les contrôles. Anomalie de fonctionnement L'appareil n'est pas approvisionné en eau. L'appareil ne vidange pas. Cause possible Solution possible Le robinet d'arrivée d'eau est obstrué ou incrusté de tartre. Nettoyez le robinet d'arrivée d'eau. La pression d'eau est trop basse. Contactez votre compagnie locale de distribution des eaux.
En cas d'anomalie de fonctionnement 69 Si l'anomalie persiste, contactez le service après-vente. Si d'autres codes d'alarme s'affichent, contactez le service après-vente. Les informations nécessaires au service après-vente figurent sur la plaque signalétique. Inscrivez les éléments suivants : – Modèle (MOD.) ........................................................ – Référence produit (PNC) .......................................... – Numéro de série (S.N.) ..............................................
Caractéristiques techniques Problème Cause possible Solution possible La vaisselle est mouillée. Le programme de lavage choisi n'avait pas de phase de séchage ou avait une phase de séchage courte. Pour de meilleurs résultats de séchage, entrouvrez la porte pendant quelques minutes. La vaisselle est mouillée et terne. Le distributeur de liquide de rinçage est vide. Remplissez le distributeur de liquide de rinçage.
En matière de protection de l'environnement 71 Si l'eau chaude est produite à partir de sources énergétiques alternatives plus respectueuses de l'environnement (par ex. panneaux solaires ou photovoltaïques et énergie éolienne), utilisez un raccordement à l'eau chaude pour réduire la consommation énergétique. EN MATIÈRE DE PROTECTION DE L'ENVIRONNEMENT Le symbole sur le produit ou son emballage indique que ce produit ne peut être traité comme déchet ménager.
Installation Pour enlever le plan de travail de l'appareil 1. Dévissez les vis situées à l'arrière (1). 2. Tirez le plan de travail par l'arrière (2). 3. Soulevez le plan de travail et dégagez-le des emboîtements avant (3). 4. Desserrez ou serrez les pieds jusqu'à ce que l'appareil soit à niveau. 5. Installez l'appareil sous le plan de travail de la cuisine. Veillez à ne pas écraser ni tordre les tuyaux d'eau au cours de l'installation.
Lorsque vous raccordez le tuyau de vidange à un embout du siphon sous l'évier, n'oubliez pas d'enlever toute la membrane en plastique (A). Si vous oubliez d'enlever la membrane, des particules d'aliments risquent de s'accumuler avec le temps et de boucher l'embout du tuyau de vidange du lave-vaisselle. Un dispositif de sécurité empêche l'eau sale de retourner dans l'appareil. Si le robinet de votre évier est doté d'un clapet de retenue, cela risque d'entraver la vidange correcte de l'appareil.
www.aeg.