Operation Manual
- 29 -
ONE STEP BUTTON HOLE SEWING
Your machine works with a buttonhole automatic. Together with the button hole foot you can sew button holes size up to 3 cm.
Please try this function with an original piece of cloth. With very thin fabric put a piece of vlies under the cloth, so you can prevent
pulling of fabric.
• Put your button in the opening
of the foot and slide the part towards the button
• Fix your button hole foot with the
button. Put the cloth under the foot.
• Put the stitch dial on 1.
• Put the stitch length on the marker of button hole symbol.
• Choose stitch width between 3 and 6.
Push button hole lever down and
to front
• Pull the lever with the button hole symbol (left of button hole foot)
down and then towards you. This lever enables automatic sewing.
• Start sewing your button hole. The machine will sew a latch and the size
of button hole is according the button.
• For another button hole pull the lever to the front.
• When the button holes are completed, push the lever up.
• With the knife you can cut the button holes in the middle.
Tip: a pin at the end of the button hole will prevent deep cutting.
Pull slide to button