68001KF-N Ceramic glass induction hob Installation and Operating Instructions
Dear Customer, Please read these user instructions carefully and keep them to refer to later. Please pass the user instructions on to any future owner of the appliance. 1 3 2 2 The following symbols are used in the text: Safety instructions Warning! Notes that concern your personal safety. Important! Notes that show how to avoid damage to the appliance.
Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cooking surface layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Control panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Instructions 1 Safety instructions 3 5 Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty. This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Correct use • This appliance should be used only for normal domestic cooking and frying of food.
Safety during use • Remove stickers and film from the glass ceramic. • There is the risk of burns from the appliance if used carelessly. • Cables from electrical appliances must not touch the hot surface of the appliance or hot cookware. • Overheated fat and oil can ignite quickly. When cooking with fat or oil (e.g. frying chips) do not leave the appliance unattended. • Switch the cooking zones off after each use.
Description of the Appliance Cooking surface layout 1850 W induction cooking zone with 2500 W Power function Induction cooking zone 2300W with power function 3200W Induction cooking zone 1400W with power function 1800W Control panel 1850 W induction cooking zone with 2500 W Power function Control panel layout Heat setting selection Power function Cooking zone indicators Timer function Timer display On/Off with power indicator 6 STOP+GO Display Timer Lock
Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields.
Displays Display ¾ u Description Cooking zone is switched off Keep warm setting Keep warm setting/STOP+GO function is set ¿ - Ç Heat settings Heat setting is set 2 - 6 Heating setting plus Intermediate heat setting is set decimal point a Automatic warm up function Automatic warm-up function is activated e Fault Malfunction has occurred f Pan detection Cookware is unsuitable or too small or no cookware has been placed on the cooking zone h Residual heat Cooking zone is still hot l Chil
Operating the appliance 3 Use the induction cooking zones with suitable cookware. Switching the appliance on and off Control panel 3 Display Switch on Touch for 2 seconds ¾ / h Switch off Touch for 1 second h / none Pilot light lights up goes out After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off.
Switching the STOP+GO function on and off The STOP+GO function simultaneously switches all cooking zones that are switched on to the keep warm setting and then back to the heat setting that was previously set. This function can be used to briefly interrupt and then continue the cooking process e.g. to take a telephone call.
The length of time that the automatic warm up function operates depends on the heat setting selected. Heat setting Length of the automatic warm up [min:sec] Intermedi- Length of the ate automatic warm up heat [min:sec] setting v 0:10 1 0:10 2 0:10 2. 1:20 3 3:10 3. 4:20 4 5:50 4. 8:10 5 10:10 5. 10:30 6 2:00 6.
Using the child safety device The child safety device prevents unintentional use of the appliance. Setting the child safety device Step Control panel 1. Switch on the appliance (Do not set a heat setting) 2. Touch 3. Touch Display/Signal ¾ until the signal sounds Acoustic signal l Appliance switches off. The child safety device is set. Releasing the child safety device Step 1. Control panel Switch on the appliance 2. Touch 3.
Switching the power function on and off The power function makes more power available to the induction cooking zones, e.g. to bring a large quantity of water to the boil quickly. The power function is activated for 10 minutes. After that the induction cooking zone automatically switches back to heat setting 9. Control panel Display Switch on Touch p Switch off Touch Ç Touch Ç Power Management The cooking zones have a maximum power available to them.
Using the timer All cooking zones can use each use one of the two timer functions at the same time. 3 3 Function Condition Outcome after the time has elapsed Automatic cut-out a heat setting is set acoustic signal 00 flashes Cooking zone switches off Countdown timer cooking zones not in use acoustic signal 00 flashes If a cooking zone is switched off, the timer function set is also switched off.
Setting the time Step Control panel field Display 1. TIMER Select cooking zone Pilot light of the cooking zone selected flashes 2. Touch or for 00 to 99 minutes the cooking zone selected After a few seconds the pilot light flashes more slowly. The time is set. The time counts down. Switching off the timer function Step Control panel field Display 1. TIMER Select cooking zone Pilot light of the cooking zone selected flashes faster The time remaining is displayed 2.
Displaying the time remaining for a cooking zone Step Control panel field Display 1. TIMER Select cooking Pilot light of the cooking zone selectzone ed flashes faster The time remaining is displayed After a few seconds the pilot light flashes more slowly. Switching off the acoustic signal Step Control panel field Acoustic signal 1. Touch TIMER Acoustic signal to acknowledge. Acoustic signal stops.
Safety cut-out Cooking surface • If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off. • If one or more sensor fields are covered for longer than approx. 10 seconds, e.g. by a pan placed upon it, a signal sounds and the cooking surface switches off automatically. • If all cooking zones are switched off, the cooking surface automatically switches itself off after approx. 10 seconds.
Tips on cooking and frying 3 Information about acrylamides According to the latest scientific research, intensive browning of food, especially in products containing starch, may present a health risk due to acrylamide. Therefore we recommend cooking at low temperatures and not browning foods too much.
Tips on energy saving 2 2 Place cookware on the cooking zone before it is switched on. If possible, always place a lid on the cookware. Examples of cooking applications The information given in the following table is for guidance only. Heat setting Cooking process 0 V suitable for Cook time Tips/Hints Off position Keeping food warm Keeping cooked foods warm as required Cover Melting Hollandaise sauce, melting butter, chocolate, gelatine 5-25 mins.
Heat setting Cooking process suitable for Cook time Tips/Hints 7-8 Heavy frying Hash browns, loin steaks, steaks, Flädle (pancakes for garnishing soup) 5-15 mins. per pan Turn halfway through cooking 9 Boiling Searing Deep frying Boiling large quantities of water, cooking pasta, searing meat (goulash, pot roast), deep frying chips The power function is suitable for heating large quantities of liquid.
Cleaning and care 1 1 1 Take care! Risk of burns from residual heat. Important Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid. Important Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Cleaning the appliance after each use 1. Wipe the appliance with a damp cloth and a little washing up liquid. 2. Rub the appliance dry using a clean cloth. Removing deposits 1.
What to do if … Problem The cooking zones will not switch on or are not functioning Possible cause Remedy More than 10 seconds have Switch the appliance on passed since the appliance again.
Problem f flashes Possible cause Remedy Unsuitable cookware Use suitable cookware No cookware on the cooking zone Place cookware on the cooking zone The diameter of the botMove onto a smaller cooktom of the cookware is too ing zone small for the cooking zone Use suitable cookware 1 3 _ is lit Overheating protection for Switch off the cooking the cooking zone has been zone.
Disposal 2 2 Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at your local waste disposal facilities. Old appliance W The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Installation Instructions Safety instructions 1 1 The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed. A protective floor must be installed under the appliance.
A device must be provided in the electrical installation which allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors. Sticking on the seal • Clean the worktop in the area of the cut-out section.
Assembly 27
Rating Plate 68001KF-N 55GAD80AG 949 591 485 240 V 50 Hz Induction 7,3 kW 7,3 kW AEG-ELECTROLUX 29
Warranty conditions Great Britain Standard guarantee conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: • The appliance has been correctly installed and used only on the electricity or gas supply stated on the rating plate.
Service and Spare Parts If the event of your appliance requiring service, or if you wish to purchase spare parts, please contact Service Force by telephoning: 0870 5 929 929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www. serviceforce.co.
From the Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world. AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg-electrolux.
