User manual

Running the connection cable

Warning! Fire hazard!

The fuse [3] inside the positive cable

must be close to the battery to ensure

safety.

Attention! The area between

the battery terminal and the

fuse is not protected by the

fuse.

Install the connection cables from the battery to the power inverter. When installing the

red cable [2], be sure the fuse [3] is located near the battery.

Connecting the connection cables

Warning! Risk of short circuits!

Always observe the correct polarity. Avoid short circuiting the battery poles.

1. Connect the red cable with the lug [2] to the positive battery terminal (marked „P“ or

„+“).

2. Connect the black cable with the lug [1] to the negative battery terminal (marked „N“

or „-“).

Replacing the fuse

Warning! Risk of electric

shock!

Always disconnect the power inver-

ter from the battery before changing

the fuse. There otherwise is a risk of

injury due to electric shock.