User manual

19
Magnetic door seal
After opening and closing the door of your freezer whilst it is in oper-
ation, you will not immediately be able to open the door again
because a vacuum will have developed inside, keeping the door closed
until the pressures inside and outside the door have equalised. After a
few minutes you can easily reopen the door.
Switching off the appliance
1. To switch off the appliance, turn the temperature regulator to
position "0".
If the appliance is not going to be used for an extended period:
2.
Remove all deep-frozen packages as well as ice-trays.
3. Switch off the appliance by turning the temperature regulator to posi-
tion "0".
4. Remove the mains plug or switch off or disconnect the electricity sup-
ply.
5. Clean thoroughly (see section: “Cleaning and Care”).
6. Leave the door open to avoid the build up of odours.
Energy Saving Tips
• Do not install the appliance near cookers, radiators or other sources
of warmth. High ambient temperatures cause longer, more frequent
operation of the compressor.
• Ensure sufficient air circulation and exhaust at the appliance base
and at the back wall of the appliance. Never cover air vent openings.
• Do not place warm foods into the appliance. Allow warm foods to
cool first.
• Only leave door open as long as necessary.
• Do not set temperature any colder than necessary.
• Put frozen food in the fridge to defrost. The cold in the frozen food
will then be used to cool the fridge.
• Always keep the heat emitting condenser, the metal grille on the rear
wall of your appliance clean.