User manual

Problem Possible cause Solution
The buzzer sounds.
The Alarm icon flash-
ing.
The temperature in the
freezer is too high.
Refer to "HighTempera-
ture Alarm".
The door is not closed
correctly.
Refer to "Door open
alarm".
upper or lower
square is shown in
the temperature dis-
play.
An error has occurred in
measuring the tempera-
ture.
Call your service represen-
tative (the cooling system
will continue to keep food
products cold, but temper-
ature adjustment will not
be possible).
“dEMo” appears on
the display.
The appliance is in dem-
onstration mode.
Keep pressed approxi-
mately 10 sec the OK but-
ton since a long sound of
buzzer is heard and the
display shut off for a short
while: appliance start
works regularly.
The compressor runs
continuously.
The Temperature regula-
tor may be set incorrectly.
Set a warmer temperature.
The door is not closed
correctly.
Refer to "Closing the
door".
The door has been
opened too frequently.
Do not keep the door
open longer than necessa-
ry.
The food temperature is
too high.
Let the food temperature
decrease to room temper-
ature before storage.
The room temperature is
too high.
Decrease the room tem-
perature.
There is too much
frost and ice.
The door is not closed
correctly.
Refer to "Closing the
door".
The door gasket is de-
formed or dirty.
Refer to "Closing the
door".
The temperature in
the appliance is too
cold.
The Temperature regula-
tor may be set incorrectly.
Set a warmer temperature.
The temperature in
the appliance is too
warm.
The Temperature regula-
tor may be set incorrectly.
Set a colder temperature.
The door is not closed
correctly.
Refer to "Closing the
door".
The food temperature is
too high.
Let the food temperature
decrease to room temper-
ature before storage.
12
www.aeg.com