BE7314401 EN OVEN USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 7 9 10 12 14 16 18 21 23 26 27 28 Safety information Product description Before first use Control panel Daily use Clock functions Automatic programmes Using the accessories Additional functions Care and cleaning Technical data What to do if… Environment concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your personal safety and the safety of your property • For the respect of the environment • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or sell it. The manufacturer is not responsible if incorrect installation or use results in damage.
Safety information 5 • Before the installation, make sure that the kitchen cabinet has the recess dimensions applicable. • Make sure that the appliance is installed below and adjacent safe structures. • Keep the minimum distances to the other appliances and units. • The appliance cannot be positioned on a base. • Built in ovens and built in cooking surfaces are attached with special connection system. To prevent damage to the appliance, only use an appliance with the appliances from the same manufacturer.
Safety information • Always close the appliance door when you cook, even while grilling. Care and cleaning • Before maintenance, switch off the appliance and disconnect the appliance from the power supply. • Before maintenance, make sure that the appliance is cold. There is the risk of burns. There is the risk that the glass panels can break. • Keep the appliance clean at all times. A build-up of fats or other foodstuff can result in a fire.
Product description 7 Disposal of the appliance • To prevent the risk of physical injury or damage – Disconnect the appliance from the power supply. – Cut off the mains cable and discard it. – Discard the door catch. This prevents children or small animals from being closed inside of the appliance. There is the risk of suffocation.
Product description Oven accessories • Wire shelf For cookware, cake tins, roasts. • Baking tray For cakes and biscuits. • Combi pan For cake and biscuits. To bake and roast or as pan to collect fat. • Core Temperature Sensor To measure how far the food is cooked.
Before first use 9 • Telescopic runners For shelves and trays. BEFORE FIRST USE WARNING! Refer to "Safety information" chapter. Initial Cleaning • Remove all parts from the appliance. • Clean the appliance before first use. Refer to chapter "Care and Cleaning". First connection to the mains After first connection to the mains all symbols in the display are on for some seconds. For the subsequent few seconds the display shows software version.
Control panel CONTROL PANEL Electronic programmer 1 2 3 4 5 6 7 8 9 10 Use the sensor fields to operate the appliance. Sensor Field Function - DISPLAY Shows the current settings of the appliance. 2 ON/OFF To activate and deactivate the appliance. 3 OPTIONS To set an oven function or programme. Straight access to the oven function when the appliance is off. 4 MY FAVOURITE PROGRAMME You can store your favourite programme.
Control panel Display 1 2 7 1 2 3 4 5 6 7 3 6 5 4 Oven function symbol Temperature/Time display Clock/Residual heat display (also Minute minder and Time of day) Residual heat indicator Indicators for the clock functions (refer to the table "Clock functions") Heat up indicator Number of oven function/programme Other indicators of display Symbols / / Name Description Options You can choose an oven function. Automatic programme You can choose an oven programme.
Daily use DAILY USE WARNING! Refer to "Safety information" chapter. To operate the appliance you can use: • manual mode -to set an oven function, the temperature and the cooking time manually. • automatic programmes -to prepare a dish when you do not have a knowledge or experience in cooking. Setting the oven function 1. 2. 3. Touch . The display shows a preset temperature, symbol and number of the oven function. flashes in the display. or to set an oven function.
Daily use Oven function Application 11 Bottom Heat To bake cakes with a crispy base, and for the food preservation. 12 ECO Roasting ECO functions let you to optimize the energy consumption during cooking. Thus it is necessary to set the cooking time first. To get more information about the recommended settings, refer to the cooking tables with the equivalent usual oven function. Changing the oven temperature Touch / to change the temperature in steps of 5 °C.
Clock functions Energy saving The appliance has some features that help you save energy during everyday cooking: • Residual heat: – the oven function or programme operates: the heating elements are deactivated 10% time earlier (the lamp and fan continue to operate). The condition: the cooking time is longer then 30 minutes or you use the clock functions (Duration, End, Time delay). – the oven is off: you can use the heat to keep the food warm.
Clock functions 2. 3. 4. 5. Touch again and again until the display shows . flashes in the display. or to set minutes for DURAUse TION. to confirm Touch or to set hours for DURATION. Use If you touch or during setting hours for DURATION, the appliance goes to setting of the END function. 6. When the set time ends, an acoustic signal operates for two minutes. symbol and time setting flash in the display. The appliance deactivates.
Automatic programmes function. During these two minutes you can examine the cooking results and, if necessary, add END or DURATION time. Setting the Time delay function DURATION and END can be used at the same time, if the oven is to be switched on and off automatically later. In this case first set DURATION and then END function (refer to "Setting the DURATION" and "Setting the END "). When the Time delay function is activated the display shows static symbol of the oven function, with a dot and .
Automatic programmes 2. 3. 4. 5. 17 Touch or to choose the automatic recipes. or the automatic recipe activates automatically after five seconds. Touch When set time ends, an acoustic signal operates for two minutes. Symbol flashes. The appliance deactivates. Touch any sensor field or open the oven door to stop an acoustic signal. Automatic programmes with weight input If you set the weight of the meat, the appliance calculates the roasting time. 1. Touch again and again until the display shows .
Using the accessories • To deactivate the function touch gramme. . The appliance deactivates your favourite pro- When the function operates, you can change the time and temperature. USING THE ACCESSORIES WARNING! Refer to "Safety information" chapter. The core temperature sensor The core temperature sensor measures the core temperature of the meat. When the meat is at the set temperature, the appliance deactivates.
Using the accessories 19 The core temperature sensor must stay in the meat and in the socket during the cooking. While the appliance calculates the approximate duration time, the value of the Count Up Timer function shows in the Timer/Residual heat display. When the first calculation ends, the Timer/Residual heat display shows -, and then the approximate duration of the cooking. The appliance continues to calculate the duration during the cooking.
Using the accessories Installing the wire shelf and the deep pan together Put the wire shelf on the deep pan. Push the deep pan between the guide-bars of one of the oven levels. Telescopic runners - Inserting the Oven Accessories Put the baking tray or the deep pan on the telescopic runners. Put the wire shelf on the telescopic runners so that the feet point downwards. The high rim around the wire shelf is an additional device to prevent cookware from slipping.
Additional functions 21 ADDITIONAL FUNCTIONS Child safety You cannot activate the appliance on if the child safety device operates. Activating/Deactivating the child safety device: 1. Deactivate the appliance . Do not set any oven function. at the same time for minimum 2 seconds. 2. Touch and hold and 3. An acoustic signal sounds. SAFE goes on in the display when you touch any key. If the oven has "Pyro Cleaning" function, the door is locked.
Additional functions Indicator of the setting menu Description Value to set SET71) TIME EXTENSION ON/OFF 1) Selected models only You can set the settings menu only when the appliance is off. Activate the Settings menu: 1. If necessary, deactivate the appliance . 2. Touch and hold for three seconds. The display shows "SET1" and "1" flashes. / to set the setting. 3. Touch . 4. Touch / to change the value of the setting. 5. Touch . 6.
Care and cleaning 23 Cooling fan When the appliance operates, the cooling fan activates automatically to keep the surfaces of the appliance cool. If you deactivate the appliance, the cooling fan can continue to operate until the appliance cools down. Mechanical door lock The door lock is not active when you buy the appliance. To activate the door lock: Pull the door lock forward until it locks in place. To deactivate the door lock: Push the door lock back into the panel. Opening the appliance door: 1.
Care and cleaning Removing the shelf support 1. Pull the front of the shelf support away from the side wall. 2. Pull the shelf support from the back of the side wall to remove it. To install the shelf support follow the procedure in reverse. Valid with telescopic runners: The retaining pins on the telescopic shelf runners must point to the front! 2 1 Oven Ceiling You can fold down the heating element on the oven ceiling to clean the oven ceiling easily.
Care and cleaning 25 Oven lamp WARNING! There is a risk of electrical shock. Oven lamp and the lamp glass cover can be hot. Before you change the oven lamp: • Deactivate the appliance. • Remove the fuses from the fuse box or deactivate the circuit breaker. CAUTION! Put a cloth on the bottom of the interior of the appliance. It prevents damage to the lamp glass cover and the cavity. Replacing the oven lamp: 1. You can find the lamp glass cover at the cavity ceiling.
Technical data Removing the oven door 1. Open the oven door as far as it goes. 2. Fully press clamping levers (A) on the two door hinges. 3. Close the oven door until the first position (angle approximately 70°). 4. Hold of the oven door with one hand on each side and pull it away from the oven at an up angle. A A To install the door follow the procedure in reverse. The number of glass panels if different for the different models.
What to do if… 27 WHAT TO DO IF… WARNING! Refer to "Safety information" chapter. Problem Possible cause Solution The appliance does not heat up The appliance is deactivated Activate the appliance The appliance does not heat up The time of day is not set Set the clock.
Environment concerns ENVIRONMENT CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
www.aeg.
