User manual

• Deactivating the display - If
necessary, you can fully deacti-
vate the appliance. Touch
and at the same time until
the display goes out. This step
also activates the appliance.
• Eco functions - refer to "Oven
functions".
7. CLOCK FUNCTIONS
SYMBOL FUNCTION DESCRIPTION
TIME OF DAY To examine the time of day. For changing the
time of day refer to 'Setting and changing the
time'.
DURATION To set how long the appliance operates.
END To set when the appliance deactivates. You
can use the Duration and End functions at the
same time (Time delay), if the appliance is to
be activated and deactivated automatically
later.
SET+GO To start the appliance with the necessary set-
tings with only one touch of the sensor field,
any time later.
7.1 Count Up Timer
Use the Count Up Timer to monitor how
long the appliance operates. It is on im-
mediately when the appliance starts to
heat.
Reset the Count Up Timer: touch
.
Touch
until the display shows
"00:00" and the Count Up Timer starts
to count up again.
You cannot use the Count Up
Timer when Duration or End is
set.
7.2 Setting the DURATION
1.
Activate the appliance and set an
oven function and temperature.
2.
Touch again and again until the
display shows
. flashes in the
display.
3.
Use or to set the minutes for
DURATION.
4.
Touch to confirm.
5.
Use or to set the hours for
DURATION.
If you touch or while you
set the DURATION, the appli-
ance switches to the setting of
the END function.
6.
When the set time ends, an acoustic
signal sounds for two minutes.
and time setting flash in the dis-
play. The appliance deactivates.
Touch a sensor field or open the
oven door to stop the acoustic sig-
nal.
7.
Deactivate the appliance.
7.3 Setting the END
1.
Activate the appliance and set an
oven function and temperature.
2.
Touch again and again until the
display shows
. flashes in the
display.
3.
Use or to set the END (first
you set the minutes and then the
hours) and
or to confirm.
4.
When the set time ends, an acoustic
signal sounds for two minutes.
ENGLISH 13