COMPETENCE B1180-4 Built-In Electric Oven User information
Dear Customer, Please read this user information carefully and keep it to refer to later. Please pass the user information on to any future owner of the appliance. 1 3 2 2 The following symbols are used in the text: Safety instructions Warning! Information that affects your personal safety. Important! Information that prevents damage to the appliance.
Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Overview. . . . . . . . . . . . . . . . . . . . . . .
What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Safety information for the installer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Warranty conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Instructions 1 Safety instructions 5 This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Electrical safety • This appliance must be connected by a qualified electrician only. • In the event of a fault or damage to the appliance: take the fuses out or switch off.
How to avoid damage to the appliance • Do not line the oven with aluminium foil and do not place baking trays, pots, etc. on the oven floor, as the heat that builds up will damage the oven enamel. • Fruit juices dripping from the baking tray will leave stains, which you will not be able to remove. For very moist cakes, use a deep tray. • Do not put any strain on the oven door when open. • Never pour water directly into the oven when it is hot. This could cause damage to the enamel and discoloration.
Description of the Appliance General Overview Control panel Door handle Full glass door Control Panel Oven Power Indicator Temperature Pilot Light Time display Clock function buttons Oven Functions Temperature selector 7
Oven Features Top heat and heating elements Oven lighting Shelf positions Fan heating element Fan Oven shelf runners, removable Oven Accessories Shelf For dishes, cake tins, items for roasting and grilling. Grill pan with handle Support for the grill tray as a collecting vessel for fat. Grill tray Insert for the grill pan for grilling smaller amounts of food.
Before using for the first time Setting and changing the current time 3 The oven only operates when the time has been set. When the appliance has been connected to the electrical supply or when there has been a power cut, the function indicator Time flashes automatically. 1. To change the time that has already been set, press the Selection button repeatedly, until the function indicator Time flashes. 2. Set the current time using the or button. After approx.
Initial Cleaning 1 3 Before using the oven for the first time you should clean it thoroughly. Caution: Do not use any caustic, abrasive cleaners! The surface could be damaged. To clean any metal front panels use commercially available cleaning agents. 1. Turn the oven function switch to oven lighting . 2. Remove all accessories and the shelf support rails and wash them with warm water and washing up liquid. 3. Then wash out the oven with warm water and washing-up liquid and dry. 4.
Operating the Oven Switching the Oven On and Off Oven Power Indicator Oven Functions Temperature Pilot Light Temperature selector 1. Turn the oven functions control knob to the desired function. 2. Turn the temperature control knob to the desired temperature. The power indicator is lit while the oven is on. The temperature power indicator is lit while the oven is heating up. 3. To turn the oven off, turn the oven functions and temperature control knob back to the Off position.
Oven Functions The oven has the following functions: Oven function Oven Light 12 Use With this function you can light up the oven interior, e.g. for cleaning. Heating element/ fan --- Ventitherm ® Fan For baking on up to three oven Operated Cooking shelves at the same time. Set the oven temperatures 20-40 °C lower than when using Conventional. Ring element, fan Fan Controlled Defrosting For defrosting e. g. gateaux and flans, butter, bread, fruit or other frozen foods.
Attaching/Removing the Grill Pan Handle The handle is particularly useful for removing the grill pan and tray more easily from the hot oven. 1 1 Attaching the handle Insert the handle at an angle from above into the recess in the side of the grill pan (1) press and hold the release button, lift the handle gently and then lower it (2) let go of the release button.
Clock Functions Function Indicators Button Time display Function Indicators Selector Button Button Countdown To set a countdown. A signal sounds after the time has elapsed. This function does not affect the operation of the oven. Cook time To set how long the oven is to be in use. End time To set when the oven is to switch off again. Time To set, change or check the time (See also section “Before Using for the First Time”).
3 2 How to use the clock functions • When a function has been selected, the corresponding function indicator flashes for approx. 5 seconds. During this time the desired times can be set using the or button. • When the desired time has been set, the function indicator flashes for approx. another 5 seconds. After that the function indicator is then lit. The set time begins to run. • Press any of the buttons to stop the acoustic signal.
Countdown 1. Press Selection button repeatedly, until the function indicator Countdown flashes. 2. Using the or button, set the required Countdown (max. 2 hours 30 minutes). After approx. 5 seconds, the display shows the remaining time. The function indicator Countdown will light up. When the time has elapsed, the function indicator flashes and an acoustic signal sounds for 2 minutes. Press any button to switch off the signal.
Cook time 1. Press Selection button repeatedly, until the function indicator Cook time flashes. 2. Using the or button, set the required cooking time. After approx. 5 seconds, the display returns to the current time. The function indicator Cook time will light up. When the time has elapsed, the function indicator will flash, an acoustic signal will sound for 2 minutes and the oven will switch itself off. 3. Press any button to switch off the signal and the programme.
End time 1. Press Selection button repeatedly, until the function indicator End time flashes. 2. Using the or button, set the required switch-off time. After approx. 5 seconds, the display returns to the current time. The function indicator End time will light up. When the time has lapsed, the function indicator will flash, an acoustic signal will sound for 2 minutes and the oven will switch itself off. 3. Press any button to switch off the signal and the programme.
3 Cook time and End time combined Cook time and End time can be used simultaneously, if the oven is to be automatically switched on and off at a later time. 1. Using the function Cook time set the period of time that the dish requires to cook. In this example, 1 hour. 2. Using the function End time , set the time at which the dish is to be ready. In this example, 14:05. The function indicators Cook time and End time light up and the time is shown in the display. In this example, 12:05.
Usage, Tables and Tips Baking Oven function: Ventitherm ® Fan Operated Cooking Baking tins • For Ventitherm ® Fan Operated Cooking able.
3 2 General instructions With Ventitherm ® Fan Operated Cooking you can also bake two cakes at the same time in tins placed next to each other on the shelf. This does not significantly increase baking time. When frozen foods are used the trays inserted may distort during cooking. This is due to the large difference in temperature between the freezing temperature and the temperature in the oven. Once the trays have cooled the distortion will disappear again.
Baking Tables Cakes, Biscuits, Bread, Pies Ventitherm ® Fan Operated Cooking Shelfposition Time Temperature Hr. : Min.
Baking on more than one oven level Type of baking Ventitherm ® Fan Operated Cooking Ventitherm ® Fan Operated Cooking Shelf positions from bottom 2 levels 3 levels Temperature in °C Time Hours: Mins.
Tips on Baking Baking results Possible cause Remedy The cake is not browned enough at the bottom Wrong shelf level Place cake on a lower shelf The cake sinks (becomes soggy, lumpy, streaky) Oven temperature too high Use a slightly lower temperature setting Baking time too short Increase baking time Baking times cannot be reduced by setting higher temperatures Too much liquid in the dough/ mixture Use less liquid Pay attention to mixing times, especially if using mixing machines Oven temperature
Table: Desserts Ventitherm ® Fan Operated Cooking Time Desserts Shelf position Temperature °C Hr. : Min.
Roasting Oven function: Ventitherm ® Fan Operated Cooking Roasting dishes • Any heat-resistant ovenware is suitable for roasting. (Please read the manufacturer's instructions.) • Large roasting joints can be cooked directly in the tray or on the shelf with the tray placed below • For all lean meat, we recommend roasting these in a roasting tray with a lid. This makes the meat more succulent. • All types of meat, that can be browned or have crackling, can be roasted in the roasting tin without the lid.
Table: Meat, roasting, casseroles Ventitherm ® Fan Operated Cooking Time Meat Temperature ºC Hrs. : Min.
Table: Roasting, casseroles, au gratin Poultry, Game, Fish, Vegetables Ventitherm ® Fan Operated Cooking Time Quantity approx. Shelf position TemperaHrs. : Min. ture °C Casseroles, miscellaneous Casseroles 1 kg/2 lbs 1 150 2:30-3:00 Lancashire, Hot Pot 1 kg/2 lbs 1 150-160 2:15-2:30 Moussaka 1 kg/2 lbs 1 170-180 0:40-0:50 Meat Loaf 675 g/1.5 lbs 1 170-180 1:00-1:10 Chicken 1 kg/2 lbs 1 170-180 0:50-1:10 Chicken 1.5 kg/3 lbs 1 170-180 1:15-1:30 Duck 1.5-2 kg/3.
Defrosting Oven function: Fan Controlled Defrosting ting) (no temperature set- • Unpack the food and place it on a plate on the oven shelf. • Do not cover with a plate or bowl, as these can substantially lengthen the defrosting time. • For defrosting, place the shelf on the 1st oven level from the bottom. Defrosting table Food Defrosting time Min. Further defrosting time (mins.) Comments Chicken, 1000 g 100-140 20-30 Place the chicken on an upturned saucer placed on a large plate.
Grill sizes 1 3 Oven function: Full Width Dual Grill setting with maximum temperature Important: Always grill with the oven door closed. The empty oven should always be pre-heated with the grill functions for 5 minutes. • For grilling, place the shelf in the recommended shelf position. • Always insert the tray for collecting the fat into the first shelf position from the bottom. • The grilling times are for guidance only. • Grilling is particularly suitable for flat pieces of meat or fish.
Cleaning and care 1 Warning: For cleaning, the appliance must be switched off and cooled down. Warning: For safety reasons, do not clean the appliance with steam jet or high-pressure cleaning equipment. Important: Do not use any abrasive cleaners, sharp scrapers or abrasive items. Outside of the appliance • Wipe the front of the appliance with a soft cloth and a solution of washing-up liquid and warm water. • With metal fronts use the cleaners that are commercially available.
Shelf Support Rails The shelf support rails on the left and right hand sides of the oven can be removed for cleaning the side walls. Removing the shelf support rails First pull the front of the rail away from the oven wall (1) and then unhook at the back (2). 3 Fitting the shelf support rails Important! The rounded ends of the guide rails must be pointing forwards! To re-insert, first hook the rail into place at the back (1) and then insert the front and press into place (2).
Oven Lighting 1 3 Warning: Risk of electric shock! Prior to changing the oven light bulb: – Switch off the oven! – Disconnect from the electricity supply. Place a cloth on the oven floor to protect the oven light and glass cover. Changing the oven light bulb/ cleaning the glass cover 1. Remove the glass cover by turning it anti-clockwise and then clean it. 2. If necessary: replace with 25 watt, 230 V, 300 °C heat-resistant oven lighting. 3. Refit the glass cover.
Oven Roof The upper heating element can be folded down to make it easier to clean the oven roof. 1 Folding down the heating element Warning: Only fold down the heating element when the oven is switched off and there is no risk of being burnt! 1. Remove the side shelf support rails. 2. Grip the heating element at the front and pull it forwards and out over the support lug on the inner wall of the oven. 3. The heating element will now fold down.
Oven door For easier cleaning of the oven interior the oven door of your appliance can be taken off its hinges. Removing the oven door from its hinges 1. Open the oven door as far as it will go. 2. Undo the clamping levers (A) on both door hinges fully. 3. Close the oven door as far as the first position (approx. 45°). 3 4. Take hold of the oven door with a hand on each side and pull it away from the oven at an upwards angle (Take care: It is heavy).
Hanging the oven door back on its hinges 1. From the handle side take hold of the oven door with a hand on each side and hold at an angle of approx. 45°. Position the recesses on the bottom of the oven door on the hinges on the oven. Let the door slide down as far as it will go. 2. Open the oven door as far as it will go. 3. Fold up the clamping levers (A) on both door hinges back into their original positions. 4. Close the oven door.
Oven door glass 1 The oven door is fitted with two panels of glass mounted one behind the other. The inner panel can be removed for cleaning. Important Rough handling, especially around the edges of the front panel, can cause the glass to break. Removing the door glass 1. Open the oven door as far as it will go. 2. Undo the clamping levers (A) on both door hinges fully. 3. Close the oven door as far as the first position (approx. 45°). 4.
Cleaning the door glass Clean the door glass thoroughly with a solution of water and washing up liquid. Then dry it carefully. Putting the door glass back 1. From above insert the door glass at an angle into the door profile at the bottom edge of the door and lower it. 2. Take hold of the door trim (B) at each side, position it on the inside edge of the door and plug the door trim(B) into the upper edge of the door. 3 38 On the open side of the door trim (B) there is a guide bar (C).
3. Open the oven door as far as it will go. 4. Fold up the clamping levers (A) on both door hinges back into their original positions. 5. Close the oven door.
What to do if … Problem The oven does not heat up Possible cause Remedy The oven is not switched on Switch the oven on The clock is not set Set the current time on the clock The necessary settings have Check the settings not been carried out A fuse in the house’s wiring Check fuses system (in the fuse box) If the fuses trip several has tripped times, please call a qualified electrician The oven lighting is not operating 1 3 3 40 The oven bulb is faulty.
Electrical Connection The oven is designed to be connected to 230-240V~(50Hz) electricity supply. The oven has an easily accessible terminal block which is marked as follows: Letter L Live terminal Letter N Neutral terminal E Earth terminal 1 This oven must be earthed! The cable used to connect the oven to the electrical supply must comply to the specifications given below. For UK use only Connection via Cooker Control Circuit Min.
Installation Instructions 1 1 Attention: The new appliance may only be installed and connected by a registered expert. Please comply with this. If you do not, any damage resulting is not covered by the warranty. Safety information for the installer • The electrical installation is to be set up so that the appliance can be isolated from the mains with a minimum 3mm all-pole contact separation. Suitable separation devices include e.g.
Warranty conditions Great Britain Standard guarantee conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: • The appliance has been correctly installed and used only on the electricity or gas supply stated on the rating plate.
Service and Spare Parts If the event of your appliance requiring service, or if you wish to purchase spare parts, please contact Service Force by telephoning: 0870 5 929 929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www. serviceforce.co.
From the Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world. AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg-electrolux.
