Operation Manual

68
Changing the default settings
Deleting a Playlist entry 1. Press the PROGRAM-button.
You will now see a Playlist.
2. Use the Cursor Buttons (Fig. 2/14) to navigate to the desired
track (for CDs) or the desired title and chapter (for DVDs) you
want to delete.
3. Delete the selected element by pressing the CLEAR-button
(Fig. 2/28) on the remote control.
Changing the default settings
A large number of default settings can be comfortably changed via
the screen menu.
Press the Setup-button (Fig. 2/25) on the remote control to start the
menu for changing the default settings.
Understanding the menu
structure
The Setup menu has two menu levels:
 Main menu: The main level is represented by graphical
symbols.
 Sub-menu: The corresponding sub-menu options can be found
under each of the main menu options.
Using the menu Navigation and selection
Use the Cursor Buttons (Fig. 2/14) (
, ) on the remote control to
browse through the main menu.
 In contrast to this, you must use the Cursor Buttons (
, ) to
move in the sub-menu.
 Select a menu option with the Play-button (Fig. 2/27).
 Use the Play-button also to select an option (e.g. "4:3
PANSCAN" in the illustration on the left). The selected option (in
the example "4:3 PANSCAN") is now highlighted.
NOTE:
Many of these default settings can be changed via both the
remote control and the menu "Default settings". The difference is:
If you change the default settings via the remote control, these
changes will only be valid until the DVD-Player is switched off or
the DVD is changed. However, any changes made in the menu
"Default settings" are permanent.
GENERAL SETUP PAGE
TV-DISPLAY
ANGLE MARK
OSD LANGUAGE
CAPTIONS
SCREEN SAVER
LAST MEMORY
Fig. 14
GENERAL SETUP PAGE
TV-DISPLAY 4:3 PANSCAN
ANGLE MARK 4:3 LETTERBOX
OSD LANGUAGE 16:9
CAPTIONS
SCREEN SAVER
LAST MEMORY
Fig. 15
Layout Clatronic.book Seite 68 Dienstag, 7. Februar 2006 3:31 15