Operation Manual

71
Changing the default settings
DGB
Audio setup page
The Audio setup page gives you the possibility to make a quite a
number of setting, which influence the audio output.
Analog audio setup
Downmix
Change the characteristics of the speaker output:
 L/R: Choose this setting if you want to play the DVD with the Pro
Logic Dolby stereo effect. This produces a almost real 2-channel
replay effect.
 Stereo: Choose this setting if you want to play a DVD, that has
been produced in the 5.1-Audio format, as 2-channel stereo
sound.
 V Surr: You may probably not have a 5.1-Audio system. In this
case you can use this setting to simulate a similar sound effect.
 5.1 CH: Choose this setting if you want to transmit the audio
signal to the output device without changing.
Front speakers
 LARGE: Bass and treble are transmitted to the front speaker.
 SMALL: Only treble is transmitted to the speaker (standard
setting).
AUDIO SETUP PAGE
ANALOG AUDIO SETUP
DIGITAL AUDIO SETUP
DOLBY DIGITAL SETUP
CHANNEL DELAY
EQUALIZER
3D PROCESSING
HDCD
Fig. 24
ANALOG AUDIO SETUP PAGE
DOWNMIX L/R
FRONT SPEAKER STEREO
CENTER SPEAKER V SURR
REAR SPEAKER 5.1 CH
SUBWOOFER
TEST SPEAKER
DIALOG
D.R.C
Fig. 25
NOTE:
If you have activated the option "5.1 CH" in the menu "Downmix",
you can now setup how the individual speakers are to be
controlled. For these settings choose the menu options "Front
Speaker", "Center Speaker" and/or "Rear Speaker".
ANALOG AUDIO SETUP PAGE
DOWNMIX
FRONT SPEAKER  LARGE
CENTER SPEAKER. SMALL
REAR SPEAKER
SUBWOOFER
TEST SPEAKER
DIALOG
D.R.C
Fig. 26
Layout Clatronic.book Seite 71 Dienstag, 7. Februar 2006 3:31 15