User manual

If you do not use the appliance
for 3 minutes, the brightness of
the display decreases to lower
the power consumption. When
you press a button, the display
goes back to the active mode.
5.4 Cooking zones
You can operate the hob with the
control knobs for the cooking
zones. Refer to the user manual
for hob.
5.5 Hob cooking zones
The cooking zone lamps (refer to
the chapter "Product descrip-
tion") show which zone you set.
Con-
trol
knob
Function
0 Off position
Keep warm setting
1 - 9 Heat settings
(1 = lowest heat setting, 9
= highest heat setting)
Con-
trol
knob
Function
Double zone switch
Operating the hob:
1.
Turn the knob to a necessary heat
setting.
2.
To complete the cooking process,
turn the knob to the off position.
5.6 Using the double zone
CAUTION!
To activate the double zone, turn
the knob clockwise. Do not turn
it through the stop position.
1.
Turn the knob clockwise to position
9.
2.
Turn the knob slowly to the symbol
until you can hear a click.
The two cooking zones are on.
3.
To set the necessary heat setting re-
fer to "Heat settings".
6. CLOCK FUNCTIONS
Clock function Application
Duration To set how long the appliance must operate.
End To set when the appliance must be deactivated.
Minute Minder To set a countdown time. An acoustic signal sounds
after the time period is completed. This function has
no effect on the operation of the appliance.
Time of day To set, change or check the time of day.
You can use Duration and
End
at the same time to set
the time when the appliance
must be activated and then de-
activated. First set Duration
,
then End
.
6.1 Setting the clock functions
1.
For Duration and End , set an
oven function and temperature. This
is not necessary for the Minute
Minder
.
2.
Press the Selection button again and
again until the indicator for the nec-
essary clock function flashes.
ENGLISH 9