User guide

1. Before cleaning, always unplug the

appliance. Never rinse or immerse

the kettle or base unit in water. Just

wipe with a damp cloth, using no

abrasive detergents. Occasionally

rinse out the kettle with clean water.

4. Decalcifying is recommended

regularly, depending on water

hardness. Fill the kettle with water

and decalcifyer according to

decalcifyer product instructions.

Do not boil the solution as it could

foam over. Afterwards, rinse kettle

thorougly with fresh water.

2. To clean the mesh  lter, grab the

strainer insert and lift out.

Cleaning the base unit – super cial

spots of rust may appear on the base

unit. Remove with a stainless steel

cleaning agent.

Cleaning

Troubleshooting

Problem Possible cause Solution

The appliance switches o before boiling. Too much lime scale at the base of the kettle. Run the decalcifying procedure.

The appliance does not switch o . Close lid until it locks.

Instert the strainer correcttly.

The appliance cannot be switched on. After operating with little or no water, the

appliance has not cooled down su ently.

Allow to cool a short time and try again.

ELX12786_Eloisa_WaterKettle_AEG_5lang_validation.indd 14 2009-10-13 15:58:41