Manual

Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
Manual Elec-
tronic
37 - 42 65 - 75 6.5 - 7.5 46 - 52
2
1)
8
29 - 36 51 - 64 5.1 - 6.4 36 - 45
2
1)
7
23 - 28 40 - 50 4.0 - 5.0 28 - 35
2
1)
6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
2
1)
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2
< 4 < 7 < 0.7 < 5
1
2)
1
2)
1)
Factory position.
2)
Do not use salt at this level.
You must adjust the water soft-
ener manually and electronically.
Manual adjustment
Turn the water hardness dial to the posi-
tion 1 or 2.
Electronic adjustment
1. Press the on/off button to activate
the appliance.
2. Make sure that the appliance is in
setting mode. Refer to ‘SETTING
AND STARTING A PROGRAMME’.
3. Press and hold the programme but-
ton until the programme indicator (A)
starts to flash and the programme in-
dicator (B) comes on.
4. Wait until the programme indicator
(B) goes off and the end indicator
starts to flash (the programme indica-
tor (A) continues to flash).
5. Press the programme button.
• The end indicator flashes intermit-
tently. The number of flashes
shows the level of the water soften-
er, e.g. 5 flashes + pause + 5 flash-
es = level 5.
6. To adjust the level of the water soft-
ener, press the programme button.
Each time you press the programme
button you go to the next level.
7. Deactivate the appliance to confirm
the setting.
ENGLISH 23