User manual

Operating Instructions
32
Starting a dishwashing cycle
0 1. Check that the dishes and cutlery are stacked in the dishwasher in such
a way that the spray arms are free to rotate.
2. Turn on the tap fully.
3. Close the door.
4. Press the ON/OFF button.
The LED in the ON/OFF button will become illuminated.
5. Press the relevant button for the cycle required (see “Cycle Table”).
The cycle indicator and the respective cycle stages in the cycle progress
display will become illuminated. The remaining time for the cycle will
be shown in the multi-display.
The selected cycle will begin after approximately 3 seconds.
The current stage of the programme will always be shown in the
programme progress display.
3
During the dishwashing cycle, the remaining time shown in the multi-
display may be adjusted according to amount of dishes, degree of soi-
ling, etc.
3
If an error message is displayed in the multi-display after the cycle has
begun, please read the section “What to do if ...”.
Changing/interrupting/aborting a dishwashing cycle
3
Only change or interrupt a dishwashing cycle that is in progress if it is
absolutely necessary. After the appliance has been closed again, the air
that has entered will be heated significantly and expand. As a result,
water may collect in the base of the appliance and trigger the anti-
flood system.
Changing a dishwashing cycle
3
If you would like to change the dishwashing cycle in the first 3 seconds
after having selected a cycle, briefly press the button for the new dish-
washing cycle.
If you would like to change the dishwashing cycle after this time, pro-
ceed as follows:
0 1. Press the button for the new dishwashing cycle and hold it down.
The indicator for the dishwashing cycle that is currently running will flash.
After several seconds only the indicator for the new dishwashing cycle will
be flashing.
2. Release the cycle button.
The newly selected dishwashing cycle will begin.