User manual

Installation and Connection Instructions

INSTALLATION AND CONNECTION

INSTRUCTIONS

Installing the Dishwasher

• The dishwasher must be installed on a firm floor and adjusted to

ensure that it is stable and level.

• To compensate for unevenness in the

floor and to match the height of the

appliance to that of surrounding units

extend the threaded feet by uns-

crewing:

– use a screwdriver.

• For built-in dishwashers the rear feet should be adjusted from the

front of the appliance using a screwdriver.

• The drain hose, inlet hose and mains cable must not be kinked or

crushed when the dishwasher is in position.

Built-In Dishwasher

(see enclosed installation instructions)

Free-Standing Appliances

can be set up as stand-alone without additional installation.

If the dishwasher is set up next to a gas or coal cooker, a heat-

insulating, non-flammable plate must be mounted between the

dishwasher and the cooker, flush to the top edge of the work surface

(depth 57.5 cm). The plate should have aluminium foil on the side

facing the cooker.