User manual

Operating Instructions
28
1
Hot steam may escape when the dishwasher door is opened. There is a
risk of scalding. Therefore:
0 1. Open the dishwasher door carefully.
The dishwasher cycle will stop.
2. Press the button for the new dishwasher cycle and hold it down.
Then the indicator for the current cycle will flash.
After a few seconds just the indicator for the new dishwasher cycle will
be lit.
3. Release the programme button.
4. Close the dishwasher door.
The newly selected dishwasher cycle begins from the start.
Interrupting the dishwasher cycle by opening the dishwasher door
0 1. Open the dishwasher door.
The dishwasher cycle will stop.
2. Close the dishwasher door.
The dishwasher cycle will continue.
Cancelling a dishwasher cycle
0 1. Open the dishwasher door.
2. Press function buttons 2 and 3 and keep them pressed down for about
1 second.
The LED indicators of all the buttons on the control panel that can now
be selected light up.
3. Release the function buttons.
The dishwasher cycle has been cancelled.
4. Switch off the dishwasher using the ON/OFF button.
Setting or changing the start delay
Using the start delay timer you can adjust when within the next 19
hours the programme is to begin.
Setting the start delay:
0 1. Open the door of the dishwasher.
2. Press the ON/OFF button.
The LED indicators for all the buttons in the control panel that are now
able to be selected will become illuminated.
3. Continue pressing the b button until the number of hours until the
programme is to start is flashing in the multi-display.