HG795540XB EN HOB USER MANUAL
www.aeg.com CONTENTS 4 7 8 10 11 12 14 17 SAFETY INFORMATION PRODUCT DESCRIPTION DAILY USE HELPFUL HINTS AND TIPS CARE AND CLEANING TROUBLESHOOTING INSTALLATION TECHNICAL INFORMATION ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste.
ENGLISH 3 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
www.aeg.com SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. CHILDREN AND VULNERABLE PEOPLE SAFETY WARNING! Risk of suffocation, injury or permanent disability.
ENGLISH Gas connection • All gas connections should be made by a qualified person. • Make sure that there is air circulation around the appliance. • The information about the gas supply is on the rating plate. • This appliance is not connected to a device, which evacuates the products of combustion. Make sure to connect the appliance according to current installation regulations. Pay attention to requirements regarding adequate ventilation. USE WARNING! Risk of injury, burns or electric shock.
www.aeg.com • Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. DISPOSAL WARNING! Risk of injury or suffocation. • Contact your municipal authority for information on how to discard the appliance correctly. • Disconnect the appliance from the mains supply. • Cut off the mains cable and discard it. • Flat the external gas pipes.
ENGLISH PRODUCT DESCRIPTION COOKING SURFACE LAYOUT 2 3 1 Triple Crown burner 2 Semi-rapid burner 3 Semi-rapid burner 1 4 5 6 CONTROL KNOBS Symbol Description no gas supply / off position ignition position / maximum gas supply minimum gas supply 4 Semi-rapid burner 5 Auxiliary burner 6 Control knobs 7
www.aeg.com DAILY USE WARNING! Refer to "Safety information" chapter. A IGNITION OF THE BURNER B WARNING! Be very careful when you use open fire in kitchen environment. Manufacturer decline any responsibility in case misuse of the flame C Always light the burner before you put cookware. To light the burner: 1. Turn the control knob counterclockwise to the maximum position ( ) and push it down. 2. Keep the control knob pushed for approximately 5 seconds; this will let thermocouple to warm up.
ENGLISH WARNING! Always turn the flame down or switch it off before you remove the pans from the burner.
www.aeg.com HELPFUL HINTS AND TIPS WARNING! Refer to "Safety information" chapter. ENERGY SAVINGS • If possible, always put the lids on the pans. • When the liquid starts to boil, turn down the flame to barely simmer the liquid. Use cookware with diameters applicable to the size of burners.
ENGLISH 11 CARE AND CLEANING WARNING! Refer to "Safety information" chapter. WARNING! Deactivate the appliance and let it cool down before you clean it. Disconnect the appliance from the electrical supply before you do cleaning or maintenance work. Scratches or dark stains on the surface have no effect on how the appliance operates. • You can remove the pan supports to easily clean the hob.
www.aeg.com TROUBLESHOOTING Problem There is no spark when lighting the gas Possible cause Remedy • There is no electrical supply • Make sure that the unit is connected and the electrical supply is switched on. • Control the fuse. If the fuse is released more than one time, refer to a qualified electrician. • Burner cap and crown are placed uneven • Make sure that the burner cap and crown are in correct positions.
ENGLISH 1 2 3 MOD. MOD. PROD.NO. PROD.NO. SER.NO SER.NO 03 IT DATA DATA MADE IN ITALY MODEL 0049 MODEL 1 Stick it on Guarantee Card and send this part 2 Stick it on Guarantee Card and keep this part 3 Stick it on instruction booklet MOD. PROD.NO. SER.NO.
www.aeg.com INSTALLATION WARNING! Refer to "Safety information" chapter. WARNING! The following instructions about installation, connection and maintenance must be carried out by qualified personnel in compliance with standards and local regulations in force. IMPORTANT SAFETY REQUIREMENTS This hob must be installed in accordance with the Gas Safety (Installation and Use) Regulations (Current Edition) and the IEE Wiring Regulations (Current Edition).
ENGLISH The connection should be suitable for connecting to R 1/2 (1/2 BSP male thread). When the final connection has been made, it is essential that a thorough leak test is carried out on the hob and installation. Make sure that the main connection pipe does not exert any strain on the hob. If you use flexible metal pipes make sure that they agree to ISO 10380 and ISO 10807 standards. Be careful they do not come in touch with mobile parts or they are not squeezed.
www.aeg.com • • • • complies with the standards and regulations force. The power cable must not touch any hot parts. The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm. You must have the correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
ENGLISH The replacement of the electrical cable must be done by a qualified electrician or competent person, according to the current regulations. REPLACEMENT OF THE CONNECTION CABLE To replace the connection cable use only H05V2V2-F T90 or equivalent type. Make sure that the cable section is applicable to the voltage and the working temperature. The yellow/green earth wire must be approximately 2 cm longer than the brown (or black) phase wire.
www.aeg.com Hob recess dimensions Category: II2H3+ Width: 750 (0 / +2) mm Gas connection: R 1/2" Length: 490 (0 / +2) mm Gas supply: G20 (2H) 20 mbar Appliance class: 3 Heat input By-pass diameters Triple Crown burner: 3.8 kW Semi-rapid burner: 1.9 kW Auxiliary burner: 1.0 kW TOTAL POWER: G20 (2H) 20 mbar = 10.
ENGLISH 19
www.aeg.