Manual

English
33
Description of iPod/iPhone/iPad Controls
(10)
You can pause and continue music playback. Press again to
continue playback.
(4)
Press 1 x = Restart of the song from the beginning.
Press 2 x = Skip to the previous song.
Press 3 x = Skip to the song before the previous song,
etc. Press and hold during playback to search
in reverse through the song.
NOTE:
On the device, press the \ button (4) momentarily.
(4)
Press to skip to the next song and the following songs. Press
and hold during playback to search forward through the
song.
NOTE:
On the device, press the \ button (3) momentarily.
RPT (7)
Activates the Repeat function.
MENU (2)
Press this button to bring up the iPod/iPhone/iPad Menu or
to return to the previous menu.
NOTE:
To do this, the music app must already have been started.
OK (4)
Press this button to activate a function or to display the next
menu.
/ (4)
Press these buttons, to scroll up/down the iPod/iPhone/iPad
Menu.
iPod/iPhone/iPad Charging
Your iPod/iPhone/iPad battery is charged as soon as the
iPod/iPhone/iPad is docked. To do this, the unit must be con-
nected to the mains.
NOTE:
• NotalliPod/iPhone/iPadgenerationssupportthe
charge mode.
• Thedurationofthechargingprocessdependson
the iPod/iPhone/iPad which is used and its operating
condition.
Connect External Devices
The AUX-IN connection is used to connect analog playback
devices. You can hear the sound of other playback devices
like an MP3 player, a CD player, etc. from the speakers via this
jack.
1. Connect the external unit with a 3.5 mm stereo plug to
the AUX-IN jack on the rear of the device.
2. Now select AUX out mode with the MODE button (3).
Thepilotlamp(5onthedevice)ashesblue.
3. You will find further instructions in the manual of your
external sound source.
4. Listen to music playback from external playback devices
via the speakers. Press the VOL+/VOL- buttons (6) to set
the volume level.
NOTE:
Set the volume of the external device to a reasonable level.
VIDEO OUT jack (rear of the device)
If you have videos stored on your iPod, iPhone, or iPad, you
can play them also via this device.
• Connectthevideojackofyourplaybackdeviceviacinch
cable (RCA) to the VIDEO OUT jack on the rear of the
device.
• Turnonyourplaybackdeviceandselectthecorrespond-
ing input. Refer to the operation instructions for your
playback device.
During playback of a video, the video picture on the iPod/
iPhone/iPad is stopped and is shown on the playback device.
The sound comes from the device speakers.
Cleaning
• Beforecleaningdisconnectfrommainspowersupply.
• Cleanthedevicewithasoftdampclothwithoutdeter-
gents.
• Donotsubmergethedeviceinwater.
To turn the VIDEO OUT jack on the rear of the device on
and off.
On = The Video signal is output to the jack.
Off = The Video signal is only shown on the connected
iPod/iPhone/iPad.
V-OUT ON/OFF (5)