Owner manual

10.7 Starting the programme
without the delay start
Press button Start/Pause to start the
programme.
The related indicator stops flashing and
stays on.
On the display all indicator related to the
load and to the quantity of detergent go
off.
The indicator of the phase in operation
flashes.
10.8 Starting a programme
with the delay start
1. Press button Delay Start again and
again until the display shows the
number of minutes or hours of delay.
The related indicator comes on.
2. Press button Start/Pause.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button Start/
Pause to start the appliance,
you can cancel or change the
set of the delay start.
10.9 Cancelling the delay start
To cancel the delay start:
1. Press button Start/Pause to set the
appliance to pause.
The related indicator flashes.
2. Press button Delay Start repeatedly
until the display shows .
3. Press button Start/Pause again to
start the programme immediately.
10.10 Behaviour of the
appliance
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the cycle
time to the laundry you
have put in the drum to
have perfect washing
results in the minimum
necessary time.
• The display shows the new
time value.
10.11 Cancelling a programme
1. Press button AutoOff to cancel the
programme and to deactivate the
appliance.
2. Press button AutoOff again to
activate the appliance.
Now, you can set a new washing
programme.
Before starting the new
programme the appliance
drains the water. Make sure
that the detergent is still in
the detergent compartment, if
not fill the detergent again.
10.12 Interrupting a
programme and changing a
function
You can change only some options
before they operate.
1. Press button Start/Pause.
The related indicator flashes.
2. Change the function set.
3. Press the button Start/Pause again.
The programme continues.
10.13 Opening the door
If the temperature and level of
the water in the drum are too
high and the drum still rotates
you cannot open the door.
While a programme or the delay start
operates, the appliance door is locked.
1. Press button Start/Pause.
ENGLISH
21