User manual

31
ENGLISH
9. INSTALLATION
The microwave can be fitted in
position A or B:
A
B
Conventional
oven
Position
Niche size
W D H
A 560 x 550 x 450
B 560 x 500 x 450
Measurements in (mm)
9.1 Installing the appliance
IMPORTANT! Ensure the bottom
of the oven is 85 cm or more
above the oor. It is important to
ensure that the installation of this
product conforms to the
instructions in this operation
manual and the conventional oven
manufacturer’s installation
instructions.
1. Remove all packaging and check
carefully for any signs of damage.
2. Fit the xing hooks to the kitchen
cupboard using the instruction sheet and
template supplied.
3. Fit the appliance into the kitchen
cupboard slowly, and without force.
The appliance should be lifted onto the
xing hooks and then lowered into place.
In the case of interference during tting,
this hook is reversible.
The front frame of the oven should seal
against the front opening of the
cupboard.
4. Ensure the appliance is stable and not
leaning. Ensure that a 4 mm gap is kept
between the cupboard door above and
the top of the frame (see diagram).
4 mm
4 mm
4 mm
TINS-B017URR0_Layout 1 08/09/2014 11:49 Page 31