'$ 6 .
www.aeg.com CONTENTS 4 6 7 9 11 12 13 16 20 21 SAFETY INFORMATION PRODUCT DESCRIPTION CONTROL PANEL DAILY USE HELPFUL HINTS AND TIPS CARE AND CLEANING TROUBLESHOOTING INSTALLATION NOISES TECHNICAL DATA ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste.
(1*/,6+ 3 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
www.aeg.com SAFETY INFORMATION In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
(1*/,6+ Make sure that the power plug is not squashed or damaged by the back of the appliance. A squashed or damaged power plug may overheat and cause a fire. 3. Make sure that you can come to the mains plug of the appliance. 4. Do not pull the mains cable. 5. If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire. 6. You must not operate the appliance without the lamp cover (if foreseen) of interior lighting. This appliance is heavy.
www.aeg.
(1*/,6+ 7 CONTROL PANEL 1 6 5 3 2 4. 1 Display The temperature indicators show the set default temperature. To select a different set temperature refer to "Temperature regulation". 2 Temperature warmer button 3 Temperature colder button 4 OK button SWITCHING OFF 5 Mode button 6 ON/OFF button It is possible to change predefined sound of buttons to a loudly one by pressing together Mode button and Temperature colder button for some seconds. Change is reversible.
www.aeg.com Press the Timer regulator button to change the Timer set value from 1 to 90 minutes. 3. Press the OK button to confirm. The Minute Minder indicator is shown. The Timer start to flash (min). At the end of the countdown the Minute Minder indicator flashes and an audible alarm sounds: 1. press OK button to switch off the sound and terminate the function. It is possible to deactivate the function at any time during the countdown: 1.
(1*/,6+ 9 DAILY USE DYNAMICAIR The refrigerator compartment is equipped with a device that allows for rapid cooling of foods and more uniform temperature in the compartment. This device activates by itself when needed, for example for a quick temperature recovering after door opening or when the ambient temperature is high. Allows you to switch on the device manually when needed (refer to "DYNAMICAIR Function").
www.aeg.com POSITIONING THE DOOR SHELVES 1 2 3 To permit storage of food packages of various sizes, the door shelves can be placed at different heights. To make these adjustments proceed as follows: gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required.
(1*/,6+ 11 HELPFUL HINTS AND TIPS NORMAL OPERATING SOUNDS • You may hear a faint gurgling and a bubbling sound when the refrigerant is pumped through the coils or tubing. This is correct. • When the compressor is on, the refrigerant is being pumped around and you will hear a whirring sound and a pulsating noise from the compressor. This is correct. • The thermic dilatation might cause a sudden cracking noise. It is natural, not dangerous physical phenomenon. This is correct.
www.aeg.com CARE AND CLEANING CLEANING THE INTERIOR • rinse and dry thoroughly. Do not pull, move or damage any pipes and/or cables inside the cabinet. Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will damage the surface and leave a strong odour.
(1*/,6+ 13 TROUBLESHOOTING During operation of the appliance some smaller but annoying trouble can often occur, which does not require calling a technician out. In the following chart information is given about them to avoid unnecessary charges on service. The operation of the appliance goes with certain sounds (compressor and circulating sound). This not means a trouble, but a normal operation. The appliance operates discontinuously, so the stopping of compressor does not mean being no current.
www.aeg.com Problem Possible cause Solution Food prevent that water Make sure that food do not flows into the water collec- touch the rear plate. tor. Water flows on the ground. The melting water outlet does not flow in the evaporative tray above the compressor. Attach the melting water outlet to the evaporative tray. The temperature in the appliance is too cold. The Temperature regulator may be set incorrectly. Set a warmer temperature. The temperature in the appliance is too warm.
(1*/,6+ REPLACING THE LAMP The appliance is equipped with a longlife LED interior light. Only service is allowed to replace the lighting device. Contact your Service Center . CLOSING THE DOOR 1. 2. Clean the door gaskets. If necessary, adjust the door. Refer to "Installation". 3. If necessary, replace the defective door gaskets. Contact the Service Center.
www.aeg.com INSTALLATION WARNING! Read the "Safety Information" carefully for your safety and correct operation of the appliance before installing the appliance.
(1*/,6+ 17 ELECTRICAL CONNECTION A B CAUTION! Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING! This appliance must be earthed. The manufacturer declines any liability should these safety measures not be observed.
www.aeg.com REAR SPACERS You can find the two spacers in the bag with documentation. Do these steps to install the spacers: 1. Release the screw. 2. Engage the spacer below the screw. 3. Turn the spacer to the right position. 4. Tighten again the screws. 2 1 3 4 LEVELLING Accurate levelling prevents the vibration and noise of the appliance during operation. To adjust the height of the appliance loosen or tighten the two adjustable front feet.
(1*/,6+ 19 • Unscrew the upper pin and screw it on the opposite side. • Refit the door. • Make sure the edge of the door is parallel with the edge of the top. 2 1 A B • Unscrew the pin (A) and screw it on the opposite side. • Remove the cap (B) and position it on the opposite side. • Screw the lower hinges. • Refit the plinth. • Stand the appliance upright. • Fit the handle on the opposite side and put the plastic caps (contained in the instructions bag) in the free holes.
www.aeg.com NOISES There are some sounds during normal running (compressor, refrigerant circulation).
(1*/,6+ HISSS! HISSS! SSSRRR! SSSRRR! CRACK! CRACK! TECHNICAL DATA Dimension Height 1540 mm Width 595 mm Depth 658 668 mm Voltage 230 - 240 V Frequency 50 Hz The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label.
www.aeg.
(1*/,6+ 23
-A- www.aeg.
