User manual

UK - 14 -

Real time clock

• Real time clock symbol is selected by pushing to "Function" button for 3 times.

• When the real time is seen on display, you can push to "Ok" button, then you can

adjust the clock by pushing "+" and "-" buttons. If you want to set the values, you will

push to "Ok" button.

• After pushing "Ok" button to set, minute number segment will blink. Also you can

adjust the value by using (+) or (-) buttons. Then you should push "Ok" button to set.

Or after adjusting, you will not push any buttons for 3 sec after it sounds as "beep-

beep". It shows that setting operation is ok.

• Showing real time clock on the screen can be cancelled by pushing the "Function"

button.

• This function is selectable for user. When it is chosen the clock will be seen on the

screen. When you push the "Function" button; this function will be cancelled.

On/OffFunction

Mode

Ambient temperature

Showing ambient temperature can be done by pushing "Function" button until the relevant

symbol blinks and the screen shows ambient temperature of the area that is device is

placed.

If you want to cancel this function, you will push "Function" button again.

On/OffFunction

Mode

PDF created with pdfFactory Pro trial version www.pdffactory.com