UK CORDLESS TELEPHONE Voxtel D200/D205 V1 UK USER GUIDE
P1 P2 1 OK 8 7 6 2 P3 3 1 2 ABC 3 DEF 4 GHI 5 JKL 6MNO 7 PQRS 8 TUV 9WXYZ 0 5 P4 R 4 P5 16 9 10 11 12 13 15 14
BECAUSE WE CARE Thank you for purchasing this product. This product has been designed and assembled with utmost care for you and the environment. This is why we supply this product with a quick installation guide to reduce the number of paper (pages) and therefor save trees to be cut for making this paper. A full and detailed user guide with all the features descripted can be found on our website www.aegtelephones.eu .
10. The use of other battery types or non-rechargeable batteries/primary cells can be dangerous. These may cause interference and/or damage to the unit or surroundings. The manufacturer will not be held liable for damage arising from such non-compliance. 11. Do not use third party charging bays. Damage may be caused to the batteries. 12. Please ensure the batteries are inserted in the correct polarity. 13. Dispose of batteries safely.
GETTING TO KNOW YOUR PHONE 5.
5 Speakerphone key t During a call: press to turn on / off the speakerphone.
Indicates that your answering machine (TAM) is on and flashes when there is a new message. Indicates that the handset ringer is switched off. Steady when an alarm is set. Flashes when the alarm is sounding. Indicates that the keypad is locked. Indicates when you have a new Voice Mail message. (This is a caller display service from the network operator.) Indicates when the battery is fully charged. Whole icon flashes when the battery is charging.
Right soft key function. Press to go back to the previous menu (back) level or cancel the current action. Right soft key function. Press the alarm, or mute/unmute the microphone during a call. 5.3 Base station with telephone answering machine (TAM) control (see P4) # Meaning 9 Delete Press once to delete the message during playback. In idle mode, press and hold to delete all the old messages. 10 Skip forward Press to skip the current message and play the next message.
Base two digit-LED display information 0F-> -0n-> XX Displayed when the answering machine is turned off. Displayed when the answering machine is turned on where XX is number of messages in TAM memory. 00 Steady on: no voice messages in the TAM. XX Flashing: there are XX new messages recorded where XX is from 01 to 59. ZZ Steady on: there are ZZ old messages in the TAM memory and no new messages.
5.5 Menu structure t In idle mode, press to go to CALL LIST, the first option in the menu list. t Press / to go to other options in the menu list. t Press OK to enter a sub-menu or function. t Press to go back to the previous level t Refer to the following for the menu structure. / Key press Main Menu Sub-menu / CALL LIST PHONEBOOK Shows Shows “EMPTY” or “EMPTY” the first Call or the first phonebook List Entry. Then for: Entry.
Writing Tips: t Once a character is selected, the cursor will move to the next position after a short pause. t You can move the cursor within the text with the / keys to amend the text entry. t Press to delete the last character. t Press and hold to delete the entire text string. 5.6.
Note: The base unit needs mains power for normal operation, not just for charging the handset batteries. 6.2 Installing and charging the batteries (see P3) t Place the 2 supplied batteries into the battery compartment with the polarity markings. Use only the NiMH rechargeable battery type provided with the telephone. t Position the battery compartment cover over the batteries and slide up to click into place.
to dial out the selected call list entry. 7.1.5 Call from the redial list to access the redial list and press / t Press redial number. t Press to dial out the selected redial number. to select the desired 7.1.6 Call timer Your handset automatically times the duration of every call. The call timer is displayed as soon as you answer a call or 15 seconds after dialling and remains on the screen for 5 seconds after the end of the call. It is shown in hours, minutes and seconds format (HH:MM:SS). 7.
During a call: ) to mute the microphone and “MUTED” will display on Press “C” ( the LCD. ) again to unmute the Your caller cannot hear you. Press “C” ( microphone. 7.7 Turn off the handset ringer In idle, press and hold # to turn off the handset ringer. The displayed on the LCD. icon is Note: and show “CALL” or the caller The display will still flash the call icon display number, when there is an incoming call, even if the ringer is turned off. To turn the ringer back on, press and hold # again. 7.
Note: If there are no numbers in the redial list, the display shows “EMPTY ”. 7.9.2 Store a redial number into the phonebook t Follow Steps 1 and 2 in section 7.9.1. t Press OK and / to select “ADD TO PB“. t Press OK and then enter the name you want to use in the phonebook. t Press OK and then modify the number, if necessary. t Press OK to show “MELODY 1“. t Press / to browse the ringtone list. The respective ringtone will be played when browsing the ringtone list.
7.11 Make an Internal Call (Multi - handset versions only) This feature is only applicable when there are at least two registered handsets. It allows you to make internal calls, transfer external calls from one handset to another handset and make conference calls. If the called handset is not answered within 60 seconds, the called handset will stop ringing and the calling handset will return to standby mode. Note: If only one handset is registered to the base station, when it will display “NOT POSSIBLE”.
t Press on the calling handset or put the calling handset on the charging cradle to end the current call with the external party. t The external call is transferred to the called handset. Note: If the other handset has not answered the intercom call, you can stop the intercom and return to the external call by pressing . 7.11.4 Make a 3-way conference call The conference call feature allows one external call to be shared with two handsets (in intercom).
t Press OK to store the phonebook entry. 8.2 Search for a phonebook entry In idle: and / to select “PHONEBOOK” and then press OK to t Press access the phonebook. t Enter the first letter of the name using the alphanumeric keys (e.g. if it begins with C, press the 2 key three times) and then / to scroll to the entry you want. 8.3 View a Phonebook Entry In idle: and / to select “PHONEBOOK“ and then press OK to t Press access the phonebook. t Press / to select the desired phonebook entry.
8.6 Delete all Phonebook entries t Press and / to select “PHONEBOOK“ and then press OK to access the phonebook. t Press OK and / to select “DELETE ALL“. t Press OK to display “CONFIRM?“. t Press OK to confirm. All entries will be deleted and the display will show “EMPTY“. 8.7 Check the Phonebook Usage You can check how many phonebook entries are stored in your handset and how many phonebook entries are available for you to store in the phonebook.
9.1 View the call list All received calls are saved in the call list with the latest call at the top of the list. When the call list is full, the oldest call will be replaced by a new call. Any unanswered calls which have not been viewed are marked with a icon at the centre of the bottom line of the display. to access the call list. t Press OR Press and / to show “CALL LIST”, then press OK. t Press / to select the desired entry. t Press # to view the caller’s number if applicable.
PHONE SETTINGS Your phone comes with a selection of settings that you can change to personalise your phone the way you like it to work. 10.1 Date and Time Settings If you subscribe to Caller Display the time and date settings will be automatically updated by the network when you receive an incoming call. The Caller Display service only sends the month and date, not the year, so you may need to set the year. 10.1.1 Change the Date Format t Press and / to select “HS SETTINGS“.
t Press OK and then enter the date information in the format you set in Section 10.1.1. t Press OK to confirm. Note: If date has been set before, the current date will display, otherwise, “DDMM-YY ” will display. 10.2 Alarm Settings You can set an alarm time on this phone. When an alarm is set, the alarm is shown on the handset display. When the alarm time is reached, icon and “ALARM ON“ flash on the handset display, and the alarm icon the alarm tone rings for 45 seconds.
Note: If ON is selected, you will be prompted to set the alarm time. 10.2.2 Set the Alarm Time (If Alarm time is set to be “ON“) t Follow Steps 1 to 4 in Section 10.2.1. t Enter the alarm time in 24 hour format. t Press OK to display “SNOOZE“. t Press OK and / to select snooze “ON“ or “OFF“. t Press OK to confirm. 10.3 Handset Settings 10.3.1 Set the Ringer Melody for Internal Calls t Press and / to select “HS SETTINGS“. t Press OK and / to select “RING SETUP“. t Press OK to show “INT RING“.
t Press OK and / to select the desired ringer volume (a total of 6 ringer volume levels including “VOLUME OFF“). Note: ill b The respective ringer volume w will be played during your selection. If icon will be displayed. “VOLUME OFF“ is selected, the t Press OK to confirm. 10.3.4 Set Alert Tones Three different alert tones are set on by default, but can be turned off, if desired. Key Tone - a single beep is emitted when you press a key.
t Press OK and / to select “HS DISPLAY“. t Press OK and / to select “HANDSET NAME“ or “TIME“. t Press OK to confirm. Note: If TIME is selected, but no time has been set the display will show --------. 10.5 Set the Auto Answer If you turn on the Auto Answer, you can answer a call automatically by just lifting the handset off the base or charger, without having to press any key. t Press and / to select “HS SETTINGS“. t Press OK and / to select “AUTO ANSWER“.
You will need to enter the 4-digit System PIN (Default PIN is 0000) in order to de-register a handset from the base station. A de-registered handset will have the antenna icon flashing and “REGISTER” on the display. Note: You cannot de-register the handset that you are currently using. t Press and / to select “BS SETTINGS“. t Press OK to show “DELETE HS“. t Press OK and the display shows “PIN? ------”. t Enter the 4-digit system PIN (default 0000). t Press OK and the first handset number is displayed.
Note: If the new PIN entered in Step 6 is not the same as the new system PIN entered in Step 5, you must enter the new system PIN at step 5 again. t Press OK to confirm 10.7 Handset registration Important: When you purchase your phone, all handsets are already registered to your base, so you do not need to register them. Handset registration is only necessary when you buy extra handsets or if a handset has become faulty.
t Enter the 4-digit system “PIN“ (default 0000). t Press OK to display “CONFIRM?“ t Press OK to confirm, and the phone will be reset to its default settings. 11 ANSWERING MACHINE (Only for D205) Your phone includes a telephone answering machine that records unanswered calls when it is on.The answering machine can store up to 59 messages within the maximum recording time of approximately 15 minutes. As well as recording incoming messages, you can record memos for other users of your phone.
11.2 Listen to the messages in the answering machine When new messages are recorded on the answering machine, the flashes on the handset display until all the new messages are played. After a new message is played it will be saved as an old message automatically unless it is deleted. Old messages will be played after all new messages are all played. t Press and / to select “ANS. MACHINE”. t Press OK and / to select “MSG PLAYBACK”.
Note: Alternatively, you can use the following shortcut keys to control different operations during message playback. t Press key 5 to stop message playback. t Press key 4 once to skip to repeat playing the current message from the beginning. Press twice to skip backward to play the previous message. t Press key 6 to skip to play next message. t Press key 2 to delete the current message playback. 11.3 Delete all messages in the answering machine t Press and / to select “ANS. MACHINE”.
ONLY” which does not allow callers to leave a message. In that case, your callers will be prompted to call back later. t Press and / to select “ANS. MACHINE”. t Press OK and / to select “TAM SETTINGS”. t Press OK and / to select “ANSWER MODE”. t Press OK and / to select “ANS & REC” or “ANSWER ONLY”. t Press OK to confirm. When your answering machine memory is full and it is in “ANS & RECORD”, the answer mode will change to “ANSWER ONLY” automatically.
11.5.4 Playback and Delete the Outgoing Message (OGM) You can playback your own personalised OGM or the pre-set OGM for “ANS & REC“ mode or “ANSWER ONLY“ mode and choose to delete your personalised OGM during playback and record a new one whenever you want. Please note that pre-set OGM cannot be deleted. 11.5.4.1 Playback the OGM t Press and / to select “ANS. MACHINE“. t Press OK and / to select “TAM SETTINGS“. t Press OK and / to select “OGM SETTINGS“.
t Press OK and / to select your desired answer delay. t Press OK to confirm. 11.5.6 Set the Recording Time of Incoming Message You can set the maximum length of the recording time of the incoming messages. t Press and / to select “ANS. MACHINE“. t Press OK and / to select “TAM SETTINGS“. / to select “RECORD TIME“ (Available options: t Press OK and “60S“, “120S“, “180S“ or “UNLIMITED“). t Press OK and / to select your desired recording time. t Press OK to confirm. 11.5.
to return to previous screen and you cannot hear the t Press recording. At any time if you want to pick up the call, you can press and the message recording will be stopped automatically. If the answering machine is in the process of recording, the message already stored will be saved. 11.5.8 Change the Compression Rate Three different compression rates (“HIGH“, “MEDIUM“ and “LOW“) are provided for you to select different quality levels of recording incoming message.
Note: If the new PIN entered in Step 6 is not the same as the new PIN entered in Step 5, you must enter the new system PIN at step 5 again. t Press OK to reconfirm. 11.5.9.2 Activate or Deactivate the Remote Access t Press and / to select “ANS. MACHINE“. t Press OK and / to select “TAM SETTINGS“. t Press OK and / to select “REMOTE ACC“. t Press OK and / to select “ON“ or “OFF“ to turn the remote access on or off respectively. t Press OK to confirm. 11.5.9.
Keys 2 4 5 6 7 8 9 Functions While message is not playing While message is playing Delete the current message playing Repeat playing the current message from the beginning.
TROUBLESHOOTING Problem Causes Solutions No dialling tone when pressing t The connection cord of the base station is not plugged in. t The adapter cord is not plugged in correctly in the base station. t Another handset is using the base to make a call. t Wrong telephone line cord. the t Check connections. Unplug and plug back in the mains. Check that the telephone cord has been plugged into the base station and the phone socket.
Problem Causes Solutions The caller cannot leave a message. t The answering machine is turned off. t Message memory is full. t ANSWER ONLY mode is set. t Turn on the answering machine. t Erase unnecessary messages. t Change to ANS & REC mode. I cannot operate the answering machine remotely. t You are entering the wrong remote access code. t You are pressing the dial keys too quickly. t You are using a pulse telephone.
GUARANTEE AND SERVICE The phone is guaranteed for 24 months from the date of purchase shown on your sales receipt. This guarantee does not cover any faults or defects caused by accidents, misuse, fair wear and tear, neglect, faults on the telephone line, lightning, tampering with the equipment, or any attempt at adjustment or repair other than through approved agents. Please keep your sales (till) receipt this is your proof of guarantee. 13.
14 TECHNICAL DETAILS Standard Digital Enhanced Cordless Telecommunication (DECT) Frequency range 1.88 to 1.9 GHz (bandwidth = 20 MHz) Channel bandwidth 1.728 MHz Operating range Up to 300m outdoors; Up to 50m indoors Operating time Standby: 100 hours, Talking: 10 hours Battery charge time:15 hours Temperature range Operating 0° C to 40° C, Storage -20° C to 60° C Electrical power Base unit: S004LB0600045 / S004LV0600045 input 100-240VAC 50/60Hz output 6VDC 450mA Battery Information 2 x1.
16 DISPOSAL OF THE DEVICE (ENVIRONMENT) At the end of the product lifecycle, you should not throw this product into the normal household garbage but bring the product to a collection point for the recycling of electrical and electronic equipments. The symbol on the product, user guide and/or box indicate this. Some of the product materials can be re-used if you bring them to a recycling point.
UK 43
© 2012 Binatone Electronics International Limited All rights reserved Subject to avaibility. Rights of modification reserved. AEG is a registered trademark used under license from AB Electrolux (publ) www.aegtelephones.
