Operation Manual

12
Note:
The base unit needs mains power for normal operation, not just for
charging the handset batteries.
6.2 Installing and charging the batteries (see P3)
tPlace the 2 supplied batteries into the battery compartment with
the polarity markings. Use only the NiMH rechargeable battery type
provided with the telephone.
tPosition the battery compartment cover over the batteries and slide up
to click into place.
tPut the handset on the base and charge for 15 hours before using the
handset for the first time.
>The handset will give a beep when it is properly placed on the base
or charger.
7 TELEPHONE OPERATION
7.1 Make a call
7.1.1 Preparatory dialling
tEnter the phone number and press
to connect to the line and dial the
number.
>When entering the number, if you make a mistake, press
to delete
digits.
7.1.2 Direct dialling
tPress
to connect to the line and then enter the phone number.
7.1.3 Call from the phonebook
tPress
, ,
O
K
to access the phonebook and press / to select the
desired phonebook entry.
tPress
to dial out the selected phonebook entry.
Note:
The alphanumeric keys provide a short-cut to find entries beginning with
the corresponding letters.
7.1.4 Call from the call list (only available with caller display)
tPress
to access the call list and press / to select the desired call
list entry.