Operation Manual

16
7.11 Make an Internal Call (Multi - handset versions only)
This feature is only applicable when there are at least two registered
handsets. It allows you to make internal calls, transfer external calls from
one handset to another handset and make conference calls. If the called
handset is not answered within 60 seconds, the called handset will stop
ringing and the calling handset will return to standby mode.
Note:
If only one handset is registered to the base station, when
is pressed,
it will display “NOT POSSIBLE”.
7.11.1 Intercom another handset
tIn idle mode, press “C” (
) and all the other registered handset
numbers will display, along with a “9“.
tEnter the number of the handset that you want to call or enter “9“ to
call all handsets.
tThe called handset rings and
must be pressed on that handset to
establish the intercom call.
Note:
If only two handsets are registered to the base station, pressing “C” (
)
will call the other handset immediately.
Note:
If there is an external call while you are on an intercom call, you‘ll hear
warning beeps, and you have to end the intercom call, before you can
answer the external call.
7.11.2 Call all handsets
tIn idle mode, press
and the registered handsets will display.
tPress the “9“ key to ring to all registered handsets.
7.11.3 Transfer an external call to another handset
During an external call:
tPress
to select “INTERCOM“.
tPress
O
K
to show all the other registered handset numbers, plus “9”.
Enter the number for the handset you want to transfer the call to.
tThe external call is put on hold automatically and the called handset
rings.
tPress
on the called handset to establish an internal call.