Operation Manual

26
You will need to enter the 4-digit System PIN (Default PIN is 0000) in order
to de-register a handset from the base station. A de-registered handset
will have the antenna icon flashing and “REGISTER” on the display.
Note:
You cannot de-register the handset that you are currently using.
tPress
and / to select “BS SETTINGS“.
tPress
O
K
to show “DELETE HS“.
tPress
O
K
and the display shows “PIN? ------”.
tEnter the 4-digit system PIN (default 0000).
tPress
O
K
and the first handset number is displayed.
tPress
/ to scroll through the list of registered handsets and select
the number of the handset you want to de-register.
tPress
O
K
to confirm, and the chosen handset will be de-registered.
10.6.4 Change the Flash (Recall) Time
You may need to change the recall (flash) time if your phone is connected
to a PBX. The recall time options are “SHORT“ (the default value of
100ms), “MEDIUM“ (300ms) or “LONG“ (600ms).
tPress
and / to select “BS SETTINGS“.
tPress
O
K
and / to select “FLASH TIME“.
tPress
OK
and / to select your desired flash time (“SHORT“,
“MEDIUM“, “LONG“, with the current setting indicated by an asterisk
to the right).
tPress
O
K
to confirm.
10.6.5 Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the
base station. It is used to protect your phone against unauthorised use.
The default system PIN code is “0000“.
tPress
and / to select “BS SETTINGS“.
tPress
O
K
and / to select “CHANGE PIN“.
tPress
O
K
and the display shows “PIN?------“
tEnter the old system PIN.
tPress
O
K
to display “NEW PIN?------“, and enter your new 4-digit
system PIN.
tPress
O
K
to display “CONFIRM?------“, and enter your new 4-digit
system PIN again.