Operation Manual

29
UK
11.2 Listen to the messages in the answering machine
When new messages are recorded on the answering machine, the
flashes on the handset display until all the new messages are played. After
a new message is played it will be saved as an old message automatically
unless it is deleted.
Old messages will be played after all new messages are all played.
tPress
and / to select “ANS. MACHINE”.
tPress
O
K
and / to select “MSG PLAYBACK”.
tPress
O
K
to start message playback through the earpiece and the
screen displays the date and time information of the message received.
Note:
A
is placed at the centre of the bottom of the handset display to
indicate that it is a new message.
When a message has been played, the
will disappear and will not be
shown when you listen to this message again.
Note:
If there are no messages, the handset display will briefly show “00-00 00-
00“ then return to “MSG PLAYBACK”.
tDuring message playback, press
or to increase or decrease the
message playback volume respectively.
tPress
and / to select “STOP”, “FORWARD”, “PREVIOUS”,
“DELETE” to perform the following functions during message playback.
STOP
Stop the current message playback and return to the
ANS. MACHINE menu.
FORWARD
Skip to play the next message. The date and time
information of the next message will display if there is
another message.
PREVIOUS
Repeat playing the current message from the beginning.
The date and time information of the current message
will display.
DELETE
Delete the current message and the next message will
be played.