Operation Manual

12
Note:
It is not possible to dial numbers from memories or use the speakerphone when the mains power is off.
When the mains power is off, you can also answer an incoming call with the corded handset.
When the phone rings, pick up the corded handset to talk to the caller.
7.16 Redial
You can redial any of the last 10 numbers called. If you have stored a name in the phonebook to go with
the number, the name will be displayed as well.
7.16.1 Redial a Number from the Redial List
In idle mode, press
to view the redial list.
Note:
The redial list can also be viewed using
then selecting “CALL LOG“ and “DIALED“.
1. Press
/ to browse the redial list.
2. Pick up the corded handset or press
to dial the selected redial number.
Note:
If no numbers are in the redial list, the display will show “EMPTY“.
7.16.2 Save a redial number into the phonebook
tFollow steps 1 and 2 in section 7.16.1.
tPress
to show “ADD TO PB?“
tPress
and then enter the name for the phonebook entry.
tPress
and then modify the number, if necessary.
tPress
and then / to select a melody.
Note:
The selected melody will only play when you receive a call if you subscribe to Caller Display and the
incoming number matches the stored number.
tPress
to save the redial number into the phonebook.
7.16.3 Delete a Redial Number
tFollow steps 1 and 2 in section 7.16.1.
tPress
and / to select “DELETE?“.
tPress
to show “CONFIRM?“.
tPress
to confirm the delete.
7.16.4 Delete All Redial List Entries
tIn idle mode, press
to open the redial list.
tPress
and / to select “DELETE ALL?“.
tPress
to show “CONFIRM?“.
tPress
to confirm the delete, and briefly display “EMPTY“.
7.17 Find the Cordless Handset
Using a cordless handset:
If you have more than one cordless handset registered to the base, press
and select the handset
number to call the other handset, or press 9 to call all registered handsets.
Note:
If there is an incoming call during the intercom calling, the phone will ring with the incoming call instead
of the intercom.
Using the corded base:
You can locate any cordless handsets by paging from the base unit:
tIn idle mode, press
and / to select “PAGE ALL HS“.
tPress
“PAGING“ will flash on the base screen.