Operation Manual

30
If the TAM is turned off, the TAM ON/OFF indicator will be off unless there are new messages.
12.6.1 Using the direct key
tFrom idle mode, press
to switch the TAM on or off.
12.6.2 Using the menu
tPress
and / to select “ANS. MACHINE“.
tPress
and / to go to “TAM ON/OFF“ and press to select.
tPress
to select “ON“ or “OFF“ then to confirm the selection.
12.7 Outgoing Message Settings
12.7.1 Record your Outgoing Message (OGM)
You can record your own OGM for “ANS & REC“ mode or “ANSWER ONLY“ mode. When you record
your own OGM, it will be used when the answering machine answers the call. If your personal OGM is
deleted, the preset OGM will be restored automatically.
12.7.1.1 Using the direct key on the base
tMake sure the TAM is set to the answer mode required, “ANS & REC“ or “ANSWER ONLY“.
tPress and hold
until you hear a beep and “RECORDING“ appears on the Base display.
Then speak clearly from about 30cm away from the base to record your personal OGM.
tWhen you want to end the recording, press the
button.
The base will playback your new personal outgoing message and display “PLAYING OGM“.
Note:
Press
at any time during recording or playback to erase your personal OGM and return to the preset
OGM.
12.7.1.2 Using the menu
tPress
and / to select “ANS. MACHINE“.
tPress
and / to select “TAM SETTINGS“.
tPress
and / to select “OGM SETTINGS“.
tPress
and / to select “ANS & REC“ or “ANSWER ONLY“.
tPress
and / to select “RECORD“.
tPress
to start recording your personal OGM and “RECORDING” is displayed on the screen.
tPress
to stop and save your personal OGM. Your newly saved OGM will playback automatically.
Note:
Press
at any time during recording or playback to erase your personal OGM and return to the preset
OGM.
12.7.2 Playback the Outgoing Message (OGM)
12.7.2.1 Using the direct key
tPress
briefly to listen to the current OGM (“ANS & REC“ or “ANSWER ONLY“).
12.7.2.2 Using the Menu
tPress
and / to select “ANS. MACHINE“.
tPress
and / to select “TAM SETTINGS“.
tPress
and / to select “OGM SETTINGS“.
tPress
and / to select “ANS & REC“ or “ANSWER ONLY“.
tPress
to show “PLAYBACK“.
tPress
to play your current OGM and display “PLAYING OGM“.
12.7.3 Delete a Personal OGM (Set OGM to DEFAULT)
12.7.3.1 Using the direct key
tPress
to play your OGM
tWhile it is playing, press “DELETE“ to delete your personal OGM and return to standby mode, with the
pre-set OGM restored automatically.