Operation Manual

31
UK
Note:
If a pre-set OGM is playing, you are not allowed to delete it, so pressing “DELETE“ will have no effect.
12.7.3.2 Using the Menu
tPress
and / to select “ANS. MACHINE“.
tPress
and / to select “TAM SETTINGS“.
tPress
and / to select “OGM SETTINGS“.
tPress
and / to select “ANS & REC“ or “ANSWER ONLY“.
tPress
and / to select “DEFAULT“.
tPress
to show “PIN ?“ and then enter the system PIN (default 0000).
tPress
to delete your personal OGM and replace it with the preset OGM.
12.8 Switch between OGMs
By default, the answer machine is set in “ANS & REC“ mode which allows callers to leave a message. This
mode can be changed to “ANSWER ONLY“ which does not allow callers to leave a message. In that case,
your callers will be prompted to call back later.
When the answering machine is switched ON, you can select “ANS & REC“ or “ANSWER ONLY“.
Using the Menu:
tPress
and / to select “ANS. MACHINE“.
tPress
and / to select “TAM SETTINGS“.
tPress
to show “ANSWER MODE“.
tPress
and / to select “ANS & REC“ or “ANSWER ONLY“.
tPress
to confirm.
12.9 TAM messages
12.9.1 Play the TAM messages
If you have new messages, the base display will show e.g. “01/02 MSGS“, which means you have 1 new
message out of a total of 2 messages.
New messages are played first, and then are saved as old messages, until they are deleted. Old messages
are played again after all new messages are played completely.
tFrom idle, press
to listen to messages and memos.
tDuring playback, press
to stop the playback.
tDuring playback, press
once to replay the current message from the beginning, or twice to replay
the previous message.
tDuring playback, press
MEMO
to skip on to the next message.
tPress
to delete the current message being played.
12.9.2 Delete a message on the TAM
tPress
while a message is playing.
tYou will hear a tone and the current message or memo playing will be deleted. If there are more
messages, the next message will start to play.
12.9.3 Delete all messages on the TAM
12.9.3.1 Using the direct key
tIn idle mode, press and hold
for 2 seconds to delete all old messages.
tYou will hear a tone and all old messages will be deleted.
Note:
New messages will not be deleted.
12.9.3.2 Using the menu
tPress
and / to select “ANS. MACHINE“.
tPress
and / to select “DELETE ALL“.
tPress
and display will show “CONFIRM?“
tPress
to confirm and the display will return to the previous menu.