Operation Manual

9
UK
7.1.2 Direct dialling
tPress
to connect to the line and then enter the phone number.
Note:
If you enter a wrong digit you cannot correct it with the “C” (
) key.
7.1.3 Call from the phonebook
tPress
, ,
O
K
to access the phonebook and press / to select the desired phonebook entry.
tPress
to dial out the selected phonebook entry.
Note:
The alphanumeric keys provide a short-cut to find entries beginning with the corresponding letters.
7.1.4 Call from the call list (only available with caller display)
tPress
to access the call list and press / to select the desired call list entry.
tPress
to dial out the selected call list entry.
7.1.5 Call from the redial list
tPress
to access the redial list and press / to select the desired redial number.
tPress
to dial out the selected redial number.
7.1.6 Call timer
Your handset automatically times the duration of every call.
The call timer is displayed as soon as you answer a call or 15 seconds after dialling and remains on the
screen for 5 seconds after the end of the call.
It is shown in hours, minutes and seconds format (HH:MM:SS).
7.2 Answer a call
If the handset is not on the charging cradle:
tWhen the phone rings, press
to answer a call.
Note:
If “AUTO ANSWER” is set to “ON”, then lifting the handset off the base or charger will answer the call
automatically and no keys need to be pressed.
7.3 End a call
tDuring a call press
to end the call.
OR
tPut the handset on the base station or charger to end the call.
7.4 Handset speakerphone
During a call, you can press
to alternate between hands-free speakerphone and normal handset use.
7.5 Adjust volume
There are 5 levels (“VOLUME 1” to “VOLUME 5”) to choose from for each of the earpiece and speaker
volumes.
During a call:
tPress
/ to select volume 1-5. The current setting is shown.
>When you end the call, the setting will remain at the last selected level.
7.6 Mute a call
You can talk to someone nearby without letting the caller hear you during a call.
During a call:
Press “C” (
) to mute the microphone and “MUTED” will display on the LCD.
Your caller cannot hear you. Press “C” (
) again to unmute the microphone.