User manual

DG258 - DigiSender® HQ2 - Twin Input 5.8GHz Wireless AV Sender
Please read this instruction manual carefully prior to installationPage 12
Using the DigiSender® HQ2
Advanced Functions
ENGLISH (EN)
Changing the Audio/Video Channel
The DigiSender® HQ2 features 4 Audio/Video Channels. Each of these Audio/Video Channels slightly
changes the frequency on which the DigiSender® HQ2 operates. Because the Audio/Video Channel
switch allows you to ‘fine tune’ the frequency on which your DigiSender® HQ2 operates, it is possible
to overcome most interference and reception troubles that may occur.
To change the Audio/Video Channel on your DigiSender® HQ2, simply change the position of the
Audio/Video Channel slider switch to 1, 2, 3 or 4.
For your DigiSender® HQ2 to function correctly it is very important that the Audio/Video Channel
settings are the same on both the Transmitter and Receiver.
Changing the Remote Relay Channel
The DigiSender® HQ2 combines our advanced DigiEye™ technology with the IR Systeme Technik™
Remote Relay kit and features 4 digital Remote Relay Channels.
To change the Remote Relay Channel on your DigiSender® HQ2, simply change the position of the
Remote Relay Channel slider switch to 1, 2, 3 or 4.
For your DigiSender® HQ2 to function correctly it is very important that the Remote Relay
Channel settings are the same on both the Transmitter and Receiver.