User manual

Please read this instruction manual carefully prior to installation Page 17
DG258 - DigiSender® HQ2 - Twin Input 5.8GHz Wireless AV Sender
Troubleshooting
Problems Controlling the Source Equipment
If you have any difficulty operating your source equipment remote control in your second room
please follow the advice below below:
1) Ensure the IR Emitter is connected to the socket labelled ‘IR’ on the DG258 Transmitter.
2) Ensure you are using the correct remote control in the second room. For instance, if you are
trying to control your Satellite Receiver you will need to use the Satellite remote control.
3) Ensure the IR Emitter is facing the Infra Red remote control pick up point on your source
equipment.
4) Move the IR Emitter further away from the source equipment.
5) Move the DigiSender® HQ2 Transmitter AND Receiver further away from other electrical
devices.
6) Try operating your source remote control closer to the DG258 Receiver.
7) Replace the batteries in your source remote control.
8) Change the Remote Relay Channel on both the Transmitter AND Receiver.
ENGLISH (EN)