User manual

Ensure that the Audio/Video and Remote Relay
Channel switches on the back of the Receiver
are set to 1.
2.
DG258 - DigiSender® HQ2 - Twin Input 5.8GHz Wireless AV Sender
Please read this instruction manual carefully prior to installationPage 08
ENGLISH (EN)
Step 4 - Install the Receiver
The Receiver will pick up the signals being sent by your Transmitter and output them to a connected
TV.
Connect the Power Supply Unit (PSU) to the
socket labelled ‘PSU’ on the Receiver.
3.
Locate a vacant SCART socket on the back of
your receiving TV and insert the DigiSender®
SCART cable.
1.
Connect the Power Supply Unit (PSU) to an
available mains socket.
4.