User manual

Please read this instruction manual carefully prior to installation Page 09
DG258 - DigiSender® HQ2 - Twin Input 5.8GHz Wireless AV Sender
ENGLISH (EN)
Step 5 - Using the DigiSender® HQ2
Switch on the source equipment (Satellite,
Freeview, DVD, VCR, etc.).
1.
Turn on the Transmitter and Receiver by pushing
the Power button on the front of the units. The
Power button will light up blue to indicate the unit
is switched on.
Alternatively press the Power button
on the DigiSender® Remote Control.
2.
On the receiving TV, select the SCART channel
assigned to the SCART socket that you plugged
the Receiver in to. This may be labelled as
SCART, AUX, AV, VIDEO, VCR or .
4.
Select Input 1 or 2 by pressing the Power but-
ton once for Input 1 or twice for Input 2 on the
Transmitter. The red Input LED will light to indi-
cate which source is active.
Alternatively press the
‘Input 1’ or ‘Input 2’ button on the DigiSender®
Remote Control at the transmitting location.
3.