User Guide

Clamp-on Ground Resistance Tester Model 6416 33
6.3.1.2 Data Displayed in Advanced Mode
First Screen:
- The last measurement is displayed,
namely the impedance referenced to
the chosen frequency.
- The MR symbol and the sequence
number of the record being recalled are
also displayed.
- Figure 6-14 illustrates an impedance
and current measurement.
- Press ► to display the next screen.
 
Second Screen:
- Figure 6-15 illustrates a contact voltage
measurement (product ZxI).
- Press ► to display the next screen.
 
Third Screen:
- Figure 6-16 illustrates a resistance and
impedance measurement (switch set to
Ω+A).
- Press ► to display the next screen.
 
Fourth Screen:
- Figure 6-17 illustrates the date and
time of the measurement (switch set to
Ω+A), namely:
- 12.30: December 30
- 15:39: 1539 hours
- Press ► to return to the  rst screen.
- To exit from the MR mode, set the
rotary switch to the desired mode.
 