User Manual AeroStar Advance 150A HV (6~12S) Brushless ESC (Opto) Manual
AeroStar Advance 120A HV (6~12S) Brushless ESC (Opto).
User Manual AeroStar Series ESC Manual AeroStar AeroStar AeroStar Series Specs : AeroStar 45A SBEC 5A AeroStar 65A SBEC 8A AeroStar 85A SBEC 8A AeroStar 125A SBEC 8A AeroStar 155A SBEC 8A AeroStar 120A OPTO HV AeroStar 150A OPTO HV 2
15OA OPTO 3
User Manual AeroStar Series ESC Manual 15OA OPTO 15OA OPTO 4
Throttle Curve Calibration 5
User Manual AeroStar Series ESC Manual 6
7
User Manual AeroStar Series ESC Manual 8
9
User Manual AeroStar Series ESC Manual 10
11
User Manual AeroStar Series ESC Manual 12
13
User Manual AeroStar Series ESC Manual Trouble Motor doesn’t work and there are no audible tones while servos work properly after powering up ESC. Possible Reason The ESC throttle calibration has been not set up. Poor/loose Connection between battery Pack and ESC. connecting the battery. Servos are not working either. Set up the ESC throttle calibration. Clean connector terminals or replace connector.
Trouble Possible Reason Battery Pack voltage has reached the Low Voltage Protection Motor stops running in flight threshold. Possible bad cable connection Action Land the model immediately and replace the battery pack. Check and verify the integrity of the cable connections The normal operation of the ESC may be susceptible to surrounding Possible RF Interference at the flying field. RF interference. Restart the ESC to resume normal operation on the ground to verify recurrence.