SDS

_____________________________________________________________________________________________
1514793 - Aervoe Marking Paint Revision Date 29-Apr-2019
Personal precautions
Evacuate personnel to safe areas. Use personal protective equipment as required. See
section 8 for more information. Avoid contact with skin, eyes or clothing. Ensure adequate
ventilation. Keep people away from and upwind of spill/leak. ELIMINATE all ignition sources
(no smoking, flares, sparks or flames in immediate area). Take precautionary measures
against static discharges. Contents under pressure. Empty containers pose a potential fire
and explosion hazard. Do not cut, puncture of weld containers.
Other Information
Ventilate the area. Refer to protective measures listed in Sections 7 and 8.
Methods and material for containment and cleaning up
Methods for containment
Stop leak if you can do it without risk. A vapor suppressing foam may be used to reduce
vapors. Dike far ahead of spill to collect runoff water. Keep out of drains, sewers, ditches
and waterways. Flood with water to complete polymerization and scrape off floor.
Methods for cleaning up
Take precautionary measures against static discharges. Dam up. Soak up with inert
absorbent material. Pick up and transfer to properly labeled containers.
7. HANDLING AND STORAGE
Precautions for safe handling
Advice on safe handling
Use personal protection equipment. Keep away from heat, hot surfaces, sparks, open
flames and other ignition sources. No smoking. Do not spray on an open flame or other
ignition source. Take necessary action to avoid static electricity discharge (which might
cause ignition of organic vapors). Use spark-proof tools and explosion-proof equipment.
Handle product only in closed system or provide appropriate exhaust ventilation. Keep in an
area equipped with sprinklers. Do not puncture or incinerate cans. Contents under
pressure. In case of rupture. Avoid breathing vapors or mists. Empty containers pose a
potential fire and explosion hazard. Do not cut, puncture of weld containers. Handle in
accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes
or clothing. Do not eat, drink or smoke when using this product. Remove contaminated
clothing and shoes. Take off contaminated clothing and wash before reuse. In case of
insufficient ventilation, wear suitable respiratory equipment.
Conditions for safe storage, including any incompatibilities
Storage Conditions
Keep containers tightly closed in a dry, cool and well-ventilated place. Protect from sunlight.
Keep away from heat, sparks, flame and other sources of ignition (i.e., pilot lights, electric
motors and static electricity). Keep in properly labeled containers. Do not store near
combustible materials. Keep in an area equipped with sprinklers. Store in accordance with
the particular national regulations. Store in accordance with local regulations. Store locked
up. Keep out of the reach of children. Store away from other materials.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Limits
.
Chemical name ACGIH TLV OSHA PEL NIOSH IDLH
Ligroine
8032-32-4
- (vacated) TWA: 300 ppm
(vacated) TWA: 1350 mg/m
3
(vacated) STEL: 400 ppm
Ceiling: 1800 mg/m
3
15 min
TWA: 350 mg/m
3
_____________________________________________________________________________________________
Page 5 / 13